Project detail ESP5 และ ESP6: 1. ติ

Project detail: ESP6 ESP5 and 1. install the new electrical cabinets delivered much HCH from the back of the original of electrical cabinets and wiring along ESP6 ESP5 domain phase 220V 380V and supply 3 phase 1 cable coming from the Cabinet, along with the main Breaker installed, add 2 sets of main cabinet.2. the Servo wiring Kit, all 9 Series (supply cable by HCH) by rail to prepare additional power cords.3. the wiring from the electrical cabinet to a new device, such as a 7 sensors (2, 1 splice detects detect misalignment, 2 new product detects, 2 new detects empty), Web guide, 6 safety guards (4 Locking, 2 Non locking), Rheostats, 7 2 solenoid (new, old, 5, 2), Vision camera + lighting.4. move electrical devices with new wiring, such as Solenoid (glue, cylinder), sensor (product, detect misalignment).5. servo motor cables, dismantling the old 4 Pack.6. Check all of the I/O Signal wires back to the total HCH.7. electrical-updated with additional corrections.

Project detail ESP5 and ESP6:
1. Install new electrical cabinet sent the HCH from the back of the electrical cabinet of ESP5 and ESP6 and wiring for supply 3 phase 380V and 220V 1 phase of the main cabinet and mounted. Breaker added that the main cabinet and two sets of
wiring kit 2. Servo all nine sets (supply cable by HCH) must prepare a draft additional wiring
3. Wiring of electrical cabinets new devices like the 7 sensors (2 misalignment detects, 1 splice detect, 2 new product detects, 2 new empty detects), Web guide, 6 safety guards (4 Locking, 2 Non locking), 2 Rheostats, 7 solenoid. (5 New, 2 Old), Vision Camera + Lighting.
4. Move electrical wiring devices such as Solenoid (glue, Cylinder), sensor (misalignment, detect product).
5. dismantle the old line four series servo motor
6. Check Signal. of all I / O wiring back together with HCH
7. Electric has updated its amendments.