ซึ่งวางบนกระจกสไลด์ แล้วใช้แม่เหล็ก

Which is placed on a glass slide. Then use the magnets on the back of the glass slide to hold temporary steel sheet mould. Then dip the pieces assembled together into hot liquid wax, which at 120-130 degrees-Celsius temperatures and 1-second period, which is the most appropriate dipping and then take a piece up on the wax paper to cool and wait. The smallest width of channel transport flows generated from a large steel plate on a 500 micrometre is 639 micrometre steel plate that is used as the mold, thickness 1 mm, cutting with laser. It costs around 11 billion baht ($ 0.35) per sheet. In addition to the expenses incurred in making the mould will be cheaper. The repeats of the dip with wax, it works with screen printing than the wax that has a problem with pressure control to scrub the wax onto your screen mesh, smooth.

Which is placed on a glass slide Then use magnets to hold the back of the glass slide mold steel plate appearances. Then dip the pieces together into a liquid wax is heated to 120-130 degrees - C, 1 second, which is the optimum temperature and time dip. Then take a piece out of the liquid wax paper and let cool. The width of the smallest of the transport fluid, based on a 500 micrometer is 639 micrometers wide steel plate is used as a mold with a thickness of 1 mm cut with a laser. It costs about 11 baht ($ 0.35) per plate than the cost of the mold will be over then. Making duplicate copies of dipping wax works better screen printing with wax, which are concerned with the control of wax polish on the grid of the screen regularly.

Which put on glass slides. Then the magnets the back of glass slide to hold the mold steel plate temporarily. Then dip assembled parts together into the heated liquid wax, which 120-130 degree Celsius 1 seconds.Then the components from the liquid wax and paper dinner. The width of the smallest of the transport fluid, which was built from steel plate width on 500) is 639 micrometers. Steel plate used as a mold has a thickness 1.Cutting with the laser cost about 11 baht ($0.35) per sheet. Besides the cost of mold will be cheaper. Copy duplicate of a dip with wax was more effective than screen printing with wax, which is a problem about the tension control in polishing wax onto the grate of the green. Consistently.