2.1 รายละเอียดเกี่ยวกับงานประจำวัน2

2.1 information about everyday tasks.2.1.1 review and analyze issues consisting of Lip seal (Reverse lip seal) was wrong because of the way the Department claim that there is a problem with the work of the TMC8 customer production piece consisting of Lip seal occur off the wrong way, I have been assigned to monitor and analyze the problem # 2 the TMC8 1 month by checking it to make Lip seal Assembly Robot.2.1.2. the task of the Master Cylinder New Model Version 4.6. ข้าพเจ้าได้รับมอบหมายให้ไปรวบรวมชิ้นส่วนของ Master Cylinder V. 4.6 ซึ่งประกอบไปด้วย Body Part, Primary Piston, Primary spring, Secondary Piston และ Secondary spring ซึ่งในการรวบรวมนี้จะต้องมีการอ้างอิงจาก Drawing ของ V. 4.6 และหมายเลขที่กำกับไว้ในแต่ละชิ้นส่วนของตัว Master Cylinder รวมไปถึง Set ค่า Parameter ในโปรแกรม PLC ในขั้นตอน Laser marking เพื่อให้เครื่องยิงบาร์โค้ดออกมาได้อย่างถูกต้อง แล้วทำการเตรียมชิ้นส่วนต่างๆเพื่อเข้าสู่ประกอบงาน เพื่อส่งไปที่บริษัทที่ออกแบบ

2.1 Details about the daily work 2.1.1. Monitor and analyze the issues comprising Lip seal the wrong way (Reverse lip seal) because the department TMC8 have problems with the customer's claim. The parts are produced to the assembly Lip seal the wrong way, so I was assigned to examine and analyze issues TMC8 # 2 for a period of one month to check it to avoid Robot operators Lip seal back way. 2.1.2 Up for New Model Version 4.6 of the Master Cylinder , I was assigned to collect the pieces of the Master Cylinder V. 4.6, which consists of a Body Part, Primary Piston, Primary spring, Secondary Piston and Secondary spring, which in this compilation. Must have references from the Drawing V. 4.6 and the number labeled on each piece of the Master Cylinder to the Parameter Set in the PLC program in step Laser marking for barcode out correctly. Then prepare to enter the assembly parts. To go to companies that design.

2.1 details about the daily

2.1.1 check and analyze the problems of composite Lip seal wrong (Reverse lip seal) due to the TMC8 have a problem with claims of customers. Workpiece manufacture out what Lip assembly seal wrong.TMC8 # 2 for a period of 1 month by inspection. To prevent the Robot assembly Lip seal the
.
2.1.2 up to the task New Model Version 4.6 of Master Cylinder
I assigned to collect pieces of Master Cylinder V. 4.6 which contains. Body Part Primary Piston Primary spring,,, and Secondary Piston Secondary spring which in this collection must have a reference from. Drawing of V. 4.6 number and directed to each piece of Master Cylinder including Set value Parameter program PLC in step Laser marking. To give the shot code out correctly. And set up the parts to assemble.