โดยมีขั้นตอนดังต่อไปนี้สำหรับ 3081.

By following these steps for 3081. in my room, the seam between the Pro version 5.50 long rate using PAC breaker 20-25 head. 2. the ceiling along the Po rate 5.5 meters long, painted version.Steps to work.1. open the ceiling rate as per guidelines, it Pro version.2. drill head sealing lacquer, PAC, according to pro rate version.3. shoot the PU foam, 300 by phaek first round lacquer head. Leave for 30 minutes to let the PU foam into the cracks along the adhesion.4. PU foam fired 300 rounds 2 to complement the meat to fill the cracks channel.5. eyelid waterproofing joints cracked by foam firing point, recent.6. keep the ceiling with paintNoteOperation time 3-5 days (depending on climate).

The procedure is as follows for. 308

1. Within a rift between pro Station, Long 5.50 to Packers 20-25 head
2. Ceiling Projector Station along the length of 5.5 meters with painted

workflow
1. Open the ceiling along the trail project. Station
2. drill mounting head Packers along the pro Station
3. PU foam fire by seizing 300 heads pack Schwarzenegger first round left 30 minutes into the PU foam adhesive along the crack
4. firing 300 rounds a second PU foam for added texture to fill the cracks
5. apply a waterproof sealing of cracks on the shot foam
with a painted ceiling 6.


the
duration of the 3-5 days (depending on. climate)

The following steps for 308.1. Inside the room, the boundaries between pro mutation, long 5.50 use packer 20-25 head.2. The ceiling along Pro mutation, long 5.5 meters with paint.Steps work.1. Open the ceiling track line per Pro mutation.2. Drilling based on head packer along the seam Pro mutation.3. Shoot PU foam based on 300 according to head แพ๊ก Walker first round, left 30 minutes to go PU foam adhesion along the crack.4. Shoot PU foam 300 round 2 to supplement full meat channel cracks.5. It absorbed the welded cracks slugs) by point shoot foam.6. Keep the ceiling with paint.Note.The duration of the operation 3-5 days. (depending on the climate.