ค้อนหัวตรง เป็นค้อนที่นิยมใช้ตามบ้า

Hammer-head and a hammer used by a typical home. There are two parts: hammerhead and handle with a hammer. Most applied to woodworking in the gripping tightly with nails, so there are both hammering nails and always. Thus all crowned hammers and nails, pegs The catch is that the hammer should catch the end of the handle with a hammer and nails, giving adequate weight to swing, not crooked.The use and maintenance of the hammer can be divided as follows:

This is a hammer head hammer used by a typical home contains two parts: a header and a hammer, hammer handle. Most applications Carpenter In the gripping tightly with screws. Therefore, both the hammer and the nails is always withdrawn. Hammer crest, thus serving both the hammer and nail removal. Holding the hammer should be held towards the end of the hammer handle. And swing weight to some extent Nails are not bent
, use and maintenance to keep the hammer. Divided as follows:

The hammer head straight. A hammer used by general house contains 2 parts: header hammer and hammer handle, usually used with woodworking, holding fixed with nails. The pegs and the removal of the nail. The hammer is a hammering and withdraw the nail. How should catch grip hammer at the end of the handle of a hammer. Swing weight and proper nails are not bent.The use and collection maintenance hammer, divided as follows.