หลักการทำงานตัว IC จะทำการ switch (

Working principle the IC will switch (sot) The induced power to keep running in the background the L in a magnetic field. When the full time IC L Brown retains the emissions. Magnetic energy was ล็ก in L will collapse into power again, but will let the secret out voltage polarity is the same as Toyota to have another temporary transit series to come from sources other than through the. Diode and filter to smooth the output C with a supply voltage greater than its cost at the same time, the IC will continue to measure the pressure at the output voltage to make the comparison. If the output voltage is too high, the IC ordered stop switch start voltage IC low if I to switch back to increase the pressure again with a very high frequency and filtered by C gives the voltage constant and smooth out evenly.

Principle, the IC will switch (Gatling) inductor L grounds to store energy in a magnetic field. At the end of the time limit L IC release energy from the ground magnetic field of flags in L will collapse again converted into electrical energy. It will relieve pressure from depolarization. Make like a temporary supply of the series with the normal supply to the diode and the smoothing filter with C out, it is more than the supply voltage. Meanwhile, the IC will also measure the voltage at the output voltage to compare the output voltage is too high, the IC will stop the switch from low voltage to the IC will be back again to increase the pressure switch. With very high frequency And a pressure filter with C makes out. Constant and uniform

The working principle, the IC were switch (stun gun) inductance L down the long Inn, to store energy in the form of magnetic field. At the end of the time limit. IC release L out of the background. Magnetic energy แหล็ก in L will subside change into electrical energy again.As a temporary source again to serial with normal supply. Through out the diode and filter to smooth with C legs. The over voltage source At the same time, the IC also was used to measure the pressure, pressure outputIf the voltage is too high IC output to stop the process switch if voltage start low IC back switch to boost pressure again. With very high frequency and filtering with C makes pressure out, constant and smooth consistency.