เซรามิกมีรากศัพท์มาจากภาษากรีกว่า k

Root words derived from languages with a ceramic green over at keramos stands what is burning. The process of production of ceramic raw material feedstock preparation first, there are 3 types of soil material (Clays), strength. Allows for more LP and LP is strong enough, after burn. Feedstock substance category helps melt (Fluxes) is a mineral that contains alkaline or alkaline earth which is melted during incineration and react with other compounds to catch a glass, with strength after burning and reduce the temperature to burn a piece of raw category filler. (Fillers), sand, glass (Silica) in the meat and the control values of Whiteware expansion due to heating of the ground beef after burn. In addition, plaster or Plaster of Paris as well as coatings and colors it is a raw material used in ceramic production process. Lampang has a natural resources as raw materials to produce a large number of ceramic. It is an important source of raw materials of the country. The next step up, there are two ways of forming the pour and the rotation. Then burn The burning temperature of the furnace increases, rising slowly. The final surface treatment coating produces beautiful, durable and prevent scratches on the surface of the ceramic can be applied to various types of products such as jars, Cookware, tableware, porcelain tiles, glazed bricks, cement, glass, refractory, material types, parts, electronic parts, electrical insulation materials, grinding polishing spaceship. Kitchen (Table ware), jewellery, decoration (Decoration & Garden ware), sanitary ware and parts in the human body.

Ceramic is derived from the Greek word that means something keramos burned. The process of manufacturing ceramic raw materials are first prepared three types of raw clay (Clays) is a toughness. Allows it to be easily molded clay. And ground beef are strong enough after a fire. Reinforcing the raw material (Fluxes) is a mineral consisting of alkali or alkaline earth. Which will melt during sintering and reacting with other compounds. To handle a glass Give strength to work after a fire. Lower the temperature to burn down the workpiece. Type of filler material (Fillers) is Sai (Silica) are mixed in the soil and Whiteware that controls the expansion due to heating of the soil after burning. Also, plaster or Plaster of Paris as well as coatings and colors. It held that the raw materials used in the production of ceramics as well. The province has natural resources as raw material for ceramic production a lot. It is the major raw material of the country. Next up are two ways of forming and pouring the dial, then burn incineration will increase the temperature of the furnace to rise slowly. The final coating The coating makes the beauty, durability and prevents scratching the surface. Ceramics can be applied to produce products such as pottery bowls. Porcelain tiles, glazed brick. Cement, glass, refractory materials, electronic components, electrical insulating materials, abrasive grinding. Aerospace parts cookware (Table ware) Decoration (Decoration & Garden ware) Ware. And parts of the human body

Ceramic is derived from the Greek Keramos means what burn process ceramics first prepared raw materials are 3 types. Clays (Clays) is the toughness can help forming the soil texture is easy. And soil texture is strong enough after burning. Raw materials of the melt (Fluxes) is a mineral consisting of alkaline or อัลคาไลน์เอิร์ท. Which will melt during the burn and react with other compounds to catch glass strength with specimen after burning. And lowers the temperature in workpiece burn down raw materials of filler (Fillers) was typhoid fever (Silica) is mixed in its audition, and Whiteware a control value of expansion due to heat of soil after burning. The plaster or Plaster of Paris including coating and various colors. It is classified as a raw material in the process of ceramic production as well. In the province has natural resources as raw materials to produce ceramic as well. It is the source of the important raw material of the country, the next step forming, forming a 2 means, namely, pouring, and using round and then burned. Burning will increase the temperature to rise slowly. Finally coating, coating to remedy this beauty, durability, and prevent scratches on the skin. Ceramics can be applied to produce various types of products, such as pots and pans, bowls, porcelain, brick, tile, material type cement. Glass, refractory materials, electronic parts, electrical insulating materials, polishing grinding spaceship parts, kitchenware (Table ware) ornaments. (Decoration & Garden ware), sanitary ware, and parts of the human body.