MC#8 มีปัญหาเรื่องการ control น้ำไม

MC # 8 has problems with poor water control, water level is low, the hot spot stains are heavy metal problem to press over the heather to fracture. Furnace cleaning cannot be performed while the water is low. On the subject of water temperature if the temperature of the water is set at higher than usual if the control temperature not hot spot stains occur, they will increasingly reward and much strength with 30-40 hot spot as if into the meat. เมือ่นำไป injection will cause a broken or chipped. I want to follow up, more.

MC # 8 The problem of poor water control water levels are low, making it a hot spot stains, heavy metals into the heather compression fracture was cleaning the stove can not be done while the water levels are low. The temperature of the water if the water temperature is set to be higher than usual if it has no temperature control plaque buildup growing hot spot and a very solid 30-40 as if the latest hot spot in the flesh. work When injected to cause cracking or chipping want to follow up more.

MC # 8 had problems of control bad water with low water level. The stain hot spot trouble heavy metals in ไปกด on Heather to breaking.




.Clean the stove can't do while the water level is low. In terms of water temperature, if the water temperature is set are higher than normal. If control temperature didn't, it will stain hot spot accumulate increasing and the hardness 30-40 imaginable.Spot if in texture. When the injection will cause the cracked or chipped. Want follow up more.