เมื่อสวิตช์แบบสั่นปิด-เปิดวงจรไฟฟ้า

When the switch closes the electrical circuit open-vibrating. Electric current through the primary winding is rhythmic changes, according to records that will cause a magnetic field that changes within the steel core of the ring because of the large number of coils coil B. Voltage briefly appears at the end of the two coils B, which is a space where the internal electric narrow Strait is enough to make the difference between a weather channel. It is an electric conductor, electric current through the Strait. You will see an electric spark moves through this Strait
. When Hertz used a flat metal plate connected to both ends of the coil secondary G Strait straight and use a wire leading customers as the rest of the circle D channel, and brought around some G Strait. Figure 18.3 electric spark will observe the D channel every time an electric G Strait.

When the vibrating switch - off the circuit. Electric current through the primary coil is changed into a rhythm as well. This will cause a change in the magnetic core of the ring. Because B had coiled coil magnetic field that changes so this will induce a voltage potential is very high. The potential difference was short Appear at both ends of the coil B, which made ​​the gap narrower. Electric field within the channel would be enough to make the air between the Strait of disintegration. It is a conductor of electricity through the strait. So every time the switch is closed or open circuit. The electric spark passes through this rut.
Posted Hz using a flat metal attached to the ends of the secondary winding is strait G and use a wire bent into a circle by the Channel D and put it near the Strait of G as well. Figure 18.3 should be noted that electric spark discharge channel D all times of the Strait of G.

When the switch oscillating on-off circuit. Current through primary coil is changed the rhythm as well. Which will cause varying magnetic field inside the iron core of the ring, because the coil B coil.Voltage for a short period of time, will appear at the end of the two coils B which made space narrow. The electric field inside the Strait is enough to make the air during the breaks. Is conducting electric current through the Strait.To see the spark moving through this channel
.When the Hertz used flat metal sheet connected with both ends of the secondary coil at the G and wire conductor bent is a circle by left the channel. D. Then brought near a creek G enough as shown 18.3 will notice that the D every time the Spark Spark at the G.