ประแจวิธีใช้งานประแจ ชนิดของประแจแล

How to use a spanner wrench

The type of spanner and wrench used safely

.Torque wrench is a tool used for tightening or loosening the clamping screws, nuts, bolts and pipe wrench to the shape, size and length vary. Wrench can be divided into three types:


.ประแจชนิดปากปรับได้ (adjustable wrenches) ประแจชนิดนี้ สามารถปรับให้ปากประแจเล็กหรือใหญ่ได้ตามความเหมาะสมของงานที่จะนำไปใช้ เช่น ประแจเลื่อน และประแจจับแป๊ป Or wrench, plier, etc.
Wrench mouth type maladjusted (Nonadjustable wrenches) wrenches this mouth spanner is a fixed size that can not be adjusted to a small or large as wrench (open-end wrench) Ring (ring or box wrenches) and wrench combination (combination wrenches), etc.
.Special wrench (special screw wrenches) wrenches of this type are usually designed to fit the screw head or nut with special effects. This is only the first type wrench 2 impractical or inconvenient, such as a box wrench (socket wrench) and padlock (set screw wrenches), etc.
.Use a wrench can be done safely.

The use of a wrench the size of the mouth and the length of the handle that best suits the user. The shaft should not be longer than usual
mouth of the wrench must not be worn, such as diverging wear or fracture
.When wearing the head wrench nut or screw it. Mouth of the wrench to tight fit and full head cover bolts
.The wrench handle for right-hander. Use the right hand grip wrench Mount from the left hand for stability. Body to be in stable condition and balance
.Whether a tightening wrench to tighten. Need to loosen or pull toward you. And prepare for oral wrench while tightening loose with
.Select the wrench, not before, such as the mouth type wrench or spanner. If these are not wrench so I used a wrench adjustable wrench mouth type instead
.The mouth type wrench adjustable wrench or spanner handles like a minute. I have to scroll side adjacent to the always
the mouth type adjustable wrench. To adjust the mouth with a wrench to tighten the knot before. Tighten gradually
Mouth and the handle of the wrench must be dry and free of oil or grease
tighten the nut or screw in a narrow or deep. Use the socket wrench For the mouth of the socket wrench long. Can be inserted into a hole in a confined space have
.While unloading the wrench must be coplanar with the screw head or nut
Do not use mouth type wrench adjustable head knots or screws to be reused because the nut or screw is deformed
.Wrench storage should be stored locations only. The dry and free of grease or oil. If so, should be used to hang it on a wooden panel or box.

Wrench wrench work help
What kind of wrench and use a wrench with security

. Wrench is a tool that uses a torque key. Used for loosening the screw head or gripping knot tightening bolts and pipe wrench will have the shape and size of different length wrench can be divided into 3. Type:


Foot-and-mouth-type wrench adjustable wrench (or Adjustable Wrenches) are of this type can be adapted to a small wrench or large mouth according to the suitability of the work to be applied, such as Pan and handle wrench wrench or a wrench paep horse.
.Wrench adjustable foot-and-mouth type does not have this type of wrench (Wrenches Nonadjustable), the mouth of the wrench is a constant size is not adjustable, large or small, such as foot-and-mouth, die wrench (Open-end Wrench) wrench ring (Ring or Box Wrenches) and wrench (Combination Wrenches).
.A special type of wrench (Special Screw Wrenches) this type of wrench is typically designed to fit the screw heads or other effects as only the first type, which handles 2 wrench do not?, the Vito Lubbock (Socket Wrench) and l-wrench (Set Screw Wrenches).
.Use a wrench to secure. :

Select a wrench with the size of the mouth and butt length that fits the job. It should not be longer than normal, especially against the mouth of corruption do not wrench
e.g. thang wear out or crack
.When worn with a wrench head knot or head screw. The mouth of the wrench must fit tightly and cover the whole head
.Holding a wrench for a right-handed grip, right hand to right hand end of the wrench. The left hand part fixed to the stable The body must be in a stable condition and balance constant.The tightening wrench, tighten, tightening or loosening must pull toward yourself and prepare for mouth wrench is dropped while tightening with
.Adjustable wrench, foot-and-mouth type should were not before, such as the mouth or ring wrench wrench died. If these wrench did not come to choose adjustable wrench pipe wrench, foot-and-mouth type move instead of
.Use the adjustable wrench pipe wrench, foot-and-mouth types, such as moving or wrench catch paep. To give the mouth a scrollable box next to the user always
using wrench adjustable foot-and-mouth type. Need to adjust the mouth tightly with wrench head knot before tightening exert little
.Mouth and butt of wrench must be dry, free of oil or grease on the screw tightening the knot or
in narrow or deep, use a dash of Jae Pak Jae bok bok, because they can conform to the long into the hot hole.
.While transporting Wrench must be the same plane with other head or head screw wrench should not use oral type
adjusting screw head with a knot or to reuse because of the loss of screw heads or other image
.To keep the wrench should have a specific storage location which is dry and free from grease or oil. If this is a good method should be used to hang the wooden panel or enter a specific box.

To be fair to be fair

how to use different types of a fair and the use of congested with security

a fair is a tool that uses the main torque used to tighten or loosen the head grip screws and screw the tube knots everywhere will have a shape and size, the length of different everywhere can be divided into 3 categories:


To be fair to his mouth type (Adjustable Wrenches) to be able to adjust to this type of mouth clung to shake small or large in accordance with the suitability of the work will be used as a slide and a fair shake or hold แป๊ป to shake his horse's neck, etc.
To be fair to the mouth of not (Nonadjustable Wrenches) to be fair to be fair, the mouth of a fixed size is not able to adjust to small or large mouth such as a fair die (Open-end Wrench) to shake a ring (or Ring Box Wrenches), and to be fair, (Combination Wrenches) etc.
A special kind of congested (Special Screw Wrenches) to be fair, this type of design is normally appropriate for the head screws or knots that have special characteristics as a specific type of access point 2 First, a fair or do not have such as a boxer in his coattails (Socket Wrench), and to be fair, (Set Screw Wrenches) etc.
The use of a hair style with the security can be made as follows:

select Use a fair size of the mouth and the length of the handle to the right to work and the Use should not be longer than normal, the handle of his mouth
to be fair is not damaged, worn out or crack widening
When you wear a fair into the head knots or screw head, and then the mouth of a busy must be fit and cover the full knots
The grip on his coattails for a right-handed, with his right hand held the end of the left hand to shake the body must be in good condition, stable and secure balance
The fair is not that it would be a gamble to tighten or release must be used to pull it toward the mouth and always ready for a shake out while tightening with
It should be a fair adjustment of the mouth is not before such as a Ring or a fair shake his mouth; and if a fair use is not a fair use, and then select the type of adjustment such as a busy slide instead
The use of the mouth to be fair to be fair, as a slide or a fair แป๊ป must be held to the mouth of the slide is attached to the user can always use
to be fair. The mouth. mouth-to shake the head, tighten the knots before then tighten exert
the mouth and the handle of a busy must be dry without oil or grease
tighten the knots or the screw in a narrow or deep, use a fair Bob because of his mouth to be fair to Bob long will be able to insert it into the hole, cramped.
When you head to shake must be in the same plane the head knots or screw head
should not be used to be kind of busy mouth. The head knots or the screws that will be used again, because the knots or the screws will be out of shape
The store should be a fair will be a place where only the store dry and free from grease or oil should be used if you will be good to hang up or put the box only to the panel.