ขั้นตอนการใช้งานเครื่องตัดกระดาษแบบ

The process of paper cutting machines use the hand rocking. Cut the paper.1. prepare a paper cutter, available.2. paper cutting machine is in proper position.3. rotate the adjustment lever for the transcribed paper. 4. adjust the lever to desired location.5. paper paper cutter. 6. set the lock lever to the top paper cutter.7. check rear view steam machine.8. the red light will help to cut out the parts that we.9. close the protective fence behind the well 10. rocking lever press, paper, transcribed tightly.11. unlock the lock out lever on top. 12. the rocking levers down on both hands.13. When you're finished, cut the paper. 14. keep paper out of the paper cutting machine.

The process of using a paper cutter Hand. Cut Paper
1. Prepare a paper cutter available
2. Cut the paper in proper position
3. Turn the lever for the paper
4. Adjust the lever to the desired position
paper 5. Insert the paper cutter.
6. Set the locking lever on the paper cutter
7. Check the rear frame
8. The red light will help point out the need to cut
off the protective 9. tightly behind
10 lever presses. paper tightly
11. Unlock the locking lever on the
lever into the top 12. Both hands
13. Completion of cut paper
14. scrap paper from the paper cutter.

Use a hand rocking process paper cutter Cut the paper
1. Prepare paper cutter available
2. Paper cutter in a position suitable
3. Rotating lever for over the paper.
4. Adjust the lever to the desired location
5.The paper put the paper cutter.
6. Set the lock lever top paper cutter
7. Check the frame back machine
8. Red light to help aim ส่วนที่ต้องการ cut
9. Close protection frame back completely.
10.Rocking lever pressed paper tightly
11. Unlock the locking lever on top.
12. Rocking lever down the top down both hands
13. Finish the paper.
14. Keep out of paper cutter, paper