1.หมุนหน้าปัดเพื่อปรับความร้อนให้เห

First. Rotary dial to adjust the heat to suit each type of fabric you want

2. Ensure that electricity can be used to report on the iron power of each country

.The cast iron is heated by a vertically on the base for about 2 minutes before rolling

3. Lights will switch on the front. And goes off when selected temperature is reached makeup on

.Traditionally, each type of flick. The heat is trapped until the selected temperature.

And the temperature dropped but it has a thermostat controls the temperature automatically. Under different temperatures.

I have selected on the dial represents the type of fabric
.
4. Should be first before ironing them synthetic chemicals in low temperatures, so the makers of wool,

parties. And linen, respectively, while the iron is hot up. The iron will heat faster than it can cool down

5.Time for a hot iron before. When changing from low to high temperatures.

And in direct contrast to the wait time to cool down

6.Rolled up after use, turn the heat knob to "0" and pull the plug out

.

1. rotate the dial to adjust the heat to suit each type of fabrics according to

2. Make sure that the electricity that is on the iron can be used with a voltage of each in it

.Lol leave the iron heated in a vertical on the base is approximately 2 minutes before ironing

3. Signal to switch when you open the iron and fire whenever a hot iron reaches the temperature selected on the page

.Rounded in accordance with each type of fabrics, lights are stuck until the heat level of the selected temperature and the temperature dropped

taet thermo control adjust the heat according to the different temperature

.
fabric type instrument.
4. first of all, their chemical and synthetic fabrics should be just before the low-temperature, and then to iron clothes, fur type,

and flax, respectively, while the iron is hot. Iron will heat faster than that will cool down

5. In case the period of iron was hot. When changing from low temperature to high temperature rise and vice versa

. wait while the change to cooler

6. When you disable the Board, and then rotate the heat adjustment button to the number "0" and pull the power plug out

.

1. turn dials to adjust the heat to each type of fabric to

2. To ensure that the current report on the iron can be used to power of each country,

as well as leaving the iron to heat up, with the vertical on the base is approximately 2 minutes before ironing

3. The lights will be on when the iron and open scripting is off when iron is heating up to a temperature has been selected on the

Each type of fabric beads under the lights are on until the heat. The temperature selected and

temperature down a thermometer แตต will be the control of heat automatically according to the temperature, the

is selected on your dashboard displays the type of the fabric

4. First of all they should be ironing board, synthetic chemistry before you in a low temperature and then to iron types of wool, and linen and

in order to heat the iron while the iron is hot, cool down faster than the

5.just in case that the iron is heating up period before when changing from low temperature to high temperature and direct

Please wait a moment while you change, skip to cool down

6.After ironing, and then, turn the heat to the number " 0" and then pull the plug out