วิทยานิพนธ์นี้มีวัตถุประสงค์เพื่อทำ

This thesis aims to analyze the design of wind turbine blades, suitable for wind power, low wind speed. Design of wind turbine generators to provide electricity at wind speed begins work at 2.5 meters per second. Wind turbine blade template. Study results showed that wind speed of 2.5 m per second. The turbine blade cone 8-degree angle with a twist, and twist the end of the 2-degree corner was 109 nm torque. That is higher than the wind turbine blades are twisted cone angle 8° along the length of the blade is 18 percent, thus bringing the results of the use of power transmission design. It was found that the two 10 kW generator start spinning at a wind speed of 2.5 m per second. Section a 1 a 20 kW generator requires wind speed begins at 4 meters per second. The performance starts, 38 percent different from the summary of the research, so choose a wind turbine blade 8-degree cone angle design twist and twist the end of the 2 degrees with a power transmission 10 kW generator 2 in designing wind turbines produce electricity for low wind speed. For areas with average wind speed range of 4-5 meters per second.

This thesis aims to analyze the design of wind turbine blades for the wind turbine low wind speeds. Wind Turbine Design To provide electricity at wind speeds starting at 2.5 meters per second prototype wind turbine blades. The study found that wind speed of 2.5 meters per second. Blade has a twisted leaf 8 degrees and the twist at the end of the second degree has a torque of 109 Nm, which is higher than the wind turbines with a twisted leaf 8 degrees entire length blade is 18 percent, so the results can be. There are no special transmission system Found that a 10 kW generator 2 starts rotating at a speed of 2.5 meters per second wind. The pattern generator, 20 kW, one must start at a wind speed of 4 meters per second. Is effective to start as 38 percent from the conclusion of the research is to use the wind angle, twist the base of 8 degrees and a twist at the end of the second degree to the transmission system, a generator, 10 kW 2. In the design of wind turbines low wind speeds. For areas with an average wind speed of 4-5 meters per second.

This thesis aims to analyze the design of wind turbine blades for wind turbines, wind speed is low. Design of a wind turbine. To produce electricity, wind speed started working at the 2.5 meters per second, a wind turbine. The results showed that the wind speed 2.5 m / s vane angle has twisted leaf base 8 degrees and twist blade tip angle 2 degrees, torque 109 Newton meters. The wind turbine is a angle twisting basal leaves 8 degrees throughout the length of leaves 18 percent. Therefore, the use of intelligent design.10 kW 2. Start rotating at wind speed 2.5 m / s level 20 kW generator 1. To use the wind speed from 4 per second. Is effective in start working different 38 percent.8 degrees and the angle of twist blade tip 2 degrees. With the transmission model 10 kW generator 2. In the design of low speed wind turbine. For areas with average wind speed range 4-5 per second.