ไม่โกด

No kot

Not Kodak

Figure 2: Wireshark You can see in Figure 2 that multiple packets were captured and the first packet is selected in the. Packet List pane. In the packet, details pane you can see the Ethernet frame header the IP, header the UDP, header and finally. The, data payload which indicates that this is a Bootstrap Protocol packet. The packet byte pane shows the hexadecimal and. ASCII equivalent of each packet at the bottom of the window. Selecting a field in the packet details pane will highlight. The hex and ASCII portions of the packet in the packet byte pane. Go ahead and start a capture session and after receiving. A, few packets stop the packet capture (from the Wireshark menu select the, "Capture", menu item and choose the "Stop command." From the drop-down menu).