1. การเปลี่ยนหลอดแบบขาสปริง ตรงขั่ว

1. replacement legs straight tubes designed to be identical to the spring bulbs, a one-time General. To change the pressure to one side first and then pull it down.2. replacement legs, General Rotate the tube back and forth, the legs out of the lock, then pull downward.3. change the power switch should be turned off before the Baltimore mold crack the cover off will see overpasses rectangular mold, detach the cable connector with screw use mold Baltimore flat screw. Then pull the cable out, then remove the wax mold Baltimore come out. Bringing a new insert then replace the screw firmly and plug into the same.4. การเปลี่ยนสตาร์ทเตอร์ ให้หมุนเอาสตารท์เตอร์ ออกจากล็อค แล้วใส่อันใหม่กลับเข้าไป โดยหันด้านที่มีขั้วเสียบเข้าไปในช่องเดิมแล้วหมุนให้แน่น

1. Change the tube pin springs. Straight tube is a tube, H. legs in general. Change of pressure to one side and pulled down.2. Change the tube legs in general. Rotate the tube back and forth out of the lock pin, then pull down.3. Changing the bulk messages should switch fire before the cap off. See Balkan cross the rectangle. Remove the hose connector by using ballast cross screwdriver loosen screw and pull out, then solve the took บัลราต out brought a new one put replaced. And solve the screw tightly and connected to the same.4. Changing the starter to rotate all start, out of the lock, and put a new one to go back. By the turn the connector plugged into the original channel and roll tightly.