การใช้ตู้เย็นอย่างถูกวิธี เพื่อการใ

Using the refrigerator correctly For a correct use. Save power and extend the useful life should study the instruction manual before use. Safety tips, and durable. 1. do not set the refrigerator near heat sources. Set close to fireplace or refrigerators are needed to make the Sun the refrigerator requires hard work. 2. set the refrigerator in the air. Do not set the refrigerator in the moisture. The location is above the refrigerator should be 300 mm side 20 mm 100 mm distance from the rear wall to close the opening in the Cabinet and the ventilation is good. 3. be careful, do not let the power cord damaged. To install the refrigerator need to be careful, do not let the power cable is damaged. Due to the power cable or power cord or overlay Cabinet is finishing. If this occurs, the damaged power cable must inform the artist express. 4. do not plug the refrigerator in conjunction with other appliances. Plug of the refrigerator should be separated from other appliances and should be protected with circuit now cutting equipment. Proper temperature control to save power. When plugged in the refrigerator temperature, rotate the ball close to their "COLD" then leave for about 30 minutes, then rotate knobs to the desired temperature level. Note: Normal twist to the number "3". The State wants to rapid ice, twist to "COLD". OFF not working, 1-2 small, 3 medium cool, 4-5 very cool, COLD cold. The melting ice. If the ice thickness until it covered the red button in the ice box. You should perform a defrost. 1. melt the ice, using a finger pressing a button in the middle of the knobs to adjust temperature. 2. some models to make the adjustment knobs to "OFF", and when the ice melts. Cooling system works automatically, but some versions after defrosting finished, twisting the knobs back to the number that you want. Pour out the water tray should be wiped dry before leaving and entering into the original point. There is some water in the defrost water will flow into the tray at the bottom and automatic evaporation. For better performance in evaporation of the water should be removed at least once a month, clean.

Using the refrigerator properly to use the correct power consumption and prolong the lifespan. Should study the manual before using the safety recommendations and use a sturdy one. Do not set the refrigerator near heat sources. The refrigerator near the stove Or sunlight to recognize the fridge to work hard 2. Refrigerators should be set at which the air flow. Do not choose a refrigerator in the colonies. The refrigerator should be at the top range of 300 mm. Side 20 mm. Rear 100 mm from the wall. So easy to open the cabinet. And breathable 3. Be careful not to damage the power cord To install the refrigerator, be careful not to damage the wiring. Due to the cabinet the power cord. Or wires are cut If the cord is damaged Must immediately inform the technician turns four. Do not plug the refrigerator with other appliances, plug the refrigerator should be separated from other electric appliances and equipment should have protective circuit breaker with a suitable temperature to save energy when plugged in refrigerator. Turn off the dryer to the "COLD", then left after about 30 minutes, then turn the knob to the desired temperature Note. Normal twist to the number "three" conditions like ice quickly, turn to the "COLD" OFF does not work, 1-2 cool slightly, 3 moderately, 4-5 very cold, COLD cold defrost. The thick ice covered the red button in the ice. You should defrost and defrost 1. Use your fingers to press the center of the knob to adjust the cooling temperature 2. Some models, adjust the knob to the "OFF" and when the ice melts. The cooling system will work automatically. But there are some models after thawing is complete. Twist the knob back to the number you want. Should eject pour water and wipe dry before putting them into the same spot. There are some water from the melted ice water to flow into the bottom tray and evaporates automatically. For better performance of evaporation should be removed and washed at least once a month.

The use of refrigerator in the right way.

for correct operation save energy and prolong the life, should study the manual before use.

safety instructions for use and durable

1.Do not set up near the heat source refrigerator, the refrigerator near the stove. Or be sunshine to make the refrigerator must work hard
2.The refrigerator should be in a well-ventilated place. Not the refrigerator should be in the damp. Location refrigerator should have top phase 300 mm side 20 mm back away from the wall 100 mm for convenient opening safety and better ventilation.
3.Be careful not to wire broken. Be careful not to install the refrigerator cord damage. Due to the cabinet over wires or wire was cut. If the wire is broken, let's change the quick
4.Don't plug in the refrigerator and other appliances plugs of the refrigerator should be separated from other electric appliances and equipment and circuit protection should be, too.

control to an appropriate temperature for energy saving

.When starting plug in the refrigerator. To rotate the ball off to adjust the temperature to the position. "COLD" after then left about 30 minutes. Then turn the knob to the desired temperature levels
note normal to a twist to the number. "3"
.The desired state ice quickly to a twist to the position. "COLD"
OFF not working, 1-2 cool slightly, 3 medium, 4-5 cold, COLD. Cold defrosting

.If the ice thickness to cover the red button in the ice You should do defrosting.
1. Defrosting, use your hit the middle of the knob to adjust the temperature of the cold
2.Some models to adjust the knob to "OFF." and when the ice is melting. The cooling system can work automatically. But there are some generations from the melting ice is finished. The twisted the knob to the number you want.There are some versions of water caused by the defrosting water will flow into the tray bottom and evaporate to automatically. For good performance of evaporation should be removed to wash at least once a month.