การเตรียมความพร้อมก่อนที่จะใช้วัดให

Preparation before use, loosen the locking screw and move the slider to determine whether the latest genius gate work and interact correctly. Before measuring, make sure the calipers read 0 when scroll off fully. If the reader is not a thick jaw adjustment 0-until you read the value zero. If you can not adjust the caliper, you will need to remember to add the correct offset from your last reading. Cleaning of the measuring surface of the two Vernier calipers, then you can use the object to measure.Close the jaw lightly on the things you want to measure. If you're measuring something, make sure that the axis of the part will be perpendicular to the calipers. That is, make sure that you are measuring the diameter of the full. Vernier with JAWS, you can put around the objects, and jawbone the other side made to fit within these objects, jaw Vice for measuring inner diameter of the object. There is also a solid bar protruding from the caliper while you open that can be used to measure the depth.

Preparation before using the measure to loosen locking screw and move the slider to determine whether the driver Aeneas gale is working correctly. Before the measure to make sure caliper reading 0 when sliding off fully. If reading is not 0 adjustable jaw thickness until you read the value zero. If you can"t adjust the caliper, you have to remember to add, delete, accurate compensation from reading the last. Clean the surface measurement of the two vernier calipers and objects, then you can use the measure.Closing jaw gently, on what you want to measure. If you"re measuring something ensure that the axis of the part is perpendicular to the caliper. That is, make sure that you have a full diameter measurement Power เนียมี jaw you can be placed around the object and the jaw on the other side, made to fit within the object. These jaw vice for measuring inner diameter of the object. There is also a solid bar sticking out of the caliper while you open that can be used to measure depth.