2. ขณะที่หุ่นยนต์อยู่บนพื้นดินหุ่นย

2. While the robot on the ground the robot will start picking up the Air Temperature Sensor using temperature.3. using a Gyro Sensor and measure the tilt of the Earth, so that now, on the ground or water surface, and use GPS to determine the coordinates that the robot is on the map. For this we use the color bars that attach to the side of the Cabinet to simulate GPS location coordinates to make robots.4. and when the robot down to the water surface. The robot will start picking up the temperature of the water throughout the journey.5. ข้อมูลทั้งหมดที่ได้รับจะมีการเก็บไว้ 2 วิธี คือ หากหุ่นยนต์สามารถติดต่อศูนย์ได้ผ่านสัญญาณวิทยุ หุ่นยนต์จะส่งข้อมูลกลับไปให้ฐานในทันที แต่หากหุ่นยนต์ไม่สามารถติดต่อฐานได้ หุ่นยนต์จะเก็บข้อมูลไว้ที่ตัวเองและรอจนกว่าปฏิบัติหน้าที่เสร็จและกลับมาถึงฐานจึงทำการส่งข้อมูลจากแท่นชาร์จโดยอัตโนมัติ ซึ่งขณะนี้เป็นการส่งข้อมูลแบบ Real-time กลับมายังศูนย์

2. While the robot is on the ground robot will keep the temperature of the Temperature Sensor
and Gyro Sensor 3. measured the tilt of the earth. To know that now is on the ground or water, and use GPS coordinates to note that this robot is any area of the map. However, we use color, which is attached inside the cabinet to simulate the GPS coordinates to the robot
4. And when the robot landed in the water. Robots will keep the temperature of the water throughout the trip
five. All information received will be kept in two ways: if the robot can contact via radio signals. The robot will send the information back to base immediately. If the robot can not reach base. The robot will store itself and waiting until work is completed and returned to the base, so the data automatically from the battery charger. Currently, the Real-time data is sent back to the center.

2. While the robot on the ground the robot will start picking up the air temperature by using Temperature Sensor
3.And Gyro Sensor measure the inclination of the ground. In order to know now is on the ground or water and used to determine the coordinates that now GPS robot in the area of any map.GPS to robot
.4. And when the robot into the water. The robot will start to keep the temperature of the water throughout the trip
5.All information received will be stored 2 methods. If the robot can contact center through the radio. The robot will send information back to the base immediately. But if the robot can not contact the base.Which now is the transmission Real-time returned to zero
.