Nuclear power plants are considered a type of thermal power plant work similar to a power plant that uses coal, oil and natural gas as fuel. By the nuclear power plant can divide the work 2. Nuclear fuel rods are inserted into the water within the structure, sealed so that the heat from a nuclear fission reactor water Tom manners, producing water vapor instead of steam produced from the combustion of fuel. The type of gas that caused pollution. As part of the nuclear reactor steam was then sent to spin turbines producing electricity which this section as an element of the heat power plants of all types of nuclear power plant components. Power generator parts It consists of the doikwang nuclear fuel. Water is used as cooling and neutron speed retardant. Members of high pressure cylinder system controlled reaction control system, which helps prevent and resolve. And production systems, steam, etc. The uranium fuel used in nuclear power plants Typically, there will be a concentration of the isotope uranium-235. Approximately 2% of the remaining uranium-238 is (which is not the principal fission manner can be. In the rupoksai of uranium ore to smelt, derived from uranium that exists in nature (uranium isotopes that exist in nature consists of uranium-235 is around 0 percent.7 and is approximately 99 percent of uranium-238.The remaining 27 are uranium-234. Very little quantity) and then go through the process to enhance performance, with uranium-235 and after, in the form of oxide, is a tiny grain of soft stuffing inside the bars of alloy. Which are bundled into the fuel bundle? Compose the members contained within the tanks, high pressure resistant members inside the tank members. There is water under controlled pressure filling is to be used as a cooling. You can also use the benefits of delay, so that the speed of the neutron neutron that happens. With the right amount of speed, that there will be a nuclear fission reactor continue manners
.
การแปล กรุณารอสักครู่..