ประแจวิธีใช้งานประแจ ชนิดของประแจแล

A spanner wrench to use.
What kind of wrench and the wrench with safety

.Torque wrench is used to tighten or loosen the grip for screw nut and bolts, pipe wrench have different shapes, sizes and lengths. Wrench can be divided into three types:


.ประแจชนิดปากปรับได้ (adjustable wrenches) ประแจชนิดนี้ สามารถปรับให้ปากประแจเล็กหรือใหญ่ได้ตามความเหมาะสมของงานที่จะนำไปใช้ เช่น ประแจเลื่อน และประแจจับแป๊ป Wrench or neck etc.
.Adjustable wrench jaws are not. (Nonadjustable wrenches) wrench type mouth wrench has a fixed size that can not be adapted to large or small, such as open end wrench (open-end wrench) key ring (ring or box wrenches) and wrench combination (combination wrenches), etc.
.Special wrench (special screw wrenches) wrench of this kind are usually designed to fit the head of the screw or nut that has an effect. The only point where the first two do not wrench or box wrench not like (socket wrench) and L wrench (set screw wrenches), etc.
.The wrench can be made with safety.

Use the wrench on the size of the mouth and the length of the handle that best suits the user. The handle should not be longer than usual
mouth of the wrench must not be worn, damaged or cracked diverging
.When worn on the head nut wrench or screw up. Mouth of the wrench to tight fit and full head cover bolts
.The wrench handle for right-handed The right hand holding the wrench. The left hand for a firm grip. The body must be in a stable condition and balance
.Tightening wrench is tightened. Or just need a way to pull it toward you. Wrench while tightening the oral and prepared for it by
.Select the type of mouth was not such a spanner wrench wrench or a key ring. Wrench if these do not work, so I used a wrench, adjustable wrench, slide the lip instead
.Using a wrench, adjustable wrench, move the mouth or a pipe wrench. I have to side with the sliding door always
the mouth adjustable wrench types. Adjustable wrench to tighten the head nut mouth first. Not so funny
exertion.Dry mouth and the handle of the wrench to tighten the nut oil or grease
or screws in tight or deep. A box wrench. For the mouth of the long box wrench. Can be inserted into the holes confined to
.Wrench should be a place to collect, store only. The dry and free of grease or oil. Better use should be hung with sheets.

Wrench wrench work help
What kind of wrench and use a wrench with security

. Wrench is a tool that uses a torque key. Used for loosening the screw head or gripping knot tightening bolts and pipe wrench will have the shape and size of different length wrench can be divided into 3. Type:


Foot-and-mouth-type wrench adjustable wrench (or Adjustable Wrenches) are of this type can be adapted to a small wrench or large mouth according to the suitability of the work to be applied, such as Pan and handle wrench wrench or a wrench paep horse.
.Wrench adjustable foot-and-mouth type does not have this type of wrench (Wrenches Nonadjustable), the mouth of the wrench is a constant size is not adjustable, large or small, such as foot-and-mouth, die wrench (Open-end Wrench) wrench ring (Ring or Box Wrenches) and wrench (Combination Wrenches).
.A special type of wrench (Special Screw Wrenches) this type of wrench is typically designed to fit the screw heads or other effects as only the first type, which handles 2 wrench do not?, the Vito Lubbock (Socket Wrench) and l-wrench (Set Screw Wrenches).
.Use a wrench to secure. :

Select a wrench with the size of the mouth and butt length that fits the job. It should not be longer than normal, especially against the mouth of corruption do not wrench
e.g. thang wear out or crack
.When worn with a wrench head knot or head screw. The mouth of the wrench must fit tightly and cover the whole head
.Holding a wrench for a right-handed grip, right hand to right hand end of the wrench. The left hand part fixed to the stable The body must be in a stable condition and balance constant.The tightening wrench, tighten, tightening or loosening must pull toward yourself and prepare for mouth wrench is dropped while tightening with
.Adjustable wrench, foot-and-mouth type should were not before, such as the mouth or ring wrench wrench died. If these wrench did not come to choose adjustable wrench pipe wrench, foot-and-mouth type move instead of
.Use the adjustable wrench pipe wrench, foot-and-mouth types, such as moving or wrench catch paep. To give the mouth a scrollable box next to the user always
using wrench adjustable foot-and-mouth type. Need to adjust the mouth tightly with wrench head knot before tightening exert little
.Mouth and butt of wrench must be dry, free of oil or grease on the screw tightening the knot or
in narrow or deep, use a dash of Jae Pak Jae bok bok, because they can conform to the long into the hot hole.
.While transporting Wrench must be the same plane with other head or head screw wrench should not use oral type
adjusting screw head with a knot or to reuse because of the loss of screw heads or other image
.To keep the wrench should have a specific storage location which is dry and free from grease or oil. If this is a good method should be used to hang the phae.

To be fair to be fair

how to use different types of a fair and the use of congested with security

a fair is a tool that uses the main torque used to tighten or loosen the head grip screws and screw the tube knots everywhere will have a shape and size, the length of different everywhere can be divided into 3 categories:


To be fair to his mouth type (Adjustable Wrenches) to be able to adjust to this type of mouth clung to shake small or large in accordance with the suitability of the work will be used as a slide and a fair shake or hold แป๊ป to shake his horse's neck, etc.
To be fair to the mouth of not (Nonadjustable Wrenches) to be fair to be fair, the mouth of a fixed size is not able to adjust to small or large mouth such as a fair die (Open-end Wrench) to shake a ring (or Ring Box Wrenches), and to be fair, (Combination Wrenches) etc.
A special kind of congested (Special Screw Wrenches) to be fair, this type of design is normally appropriate for the head screws or knots that have special characteristics as a specific type of access point 2 First, a fair or do not have such as a boxer in his coattails (Socket Wrench), and to be fair, (Set Screw Wrenches) etc.
The use of a hair style with the security can be made as follows:

select Use a fair size of the mouth and the length of the handle to the right to work and the Use should not be longer than normal, the handle of his mouth
to be fair is not damaged, worn out or crack widening
When you wear a fair into the head knots or screw head, and then the mouth of a busy must be fit and cover the full knots
The grip on his coattails for a right-handed, with his right hand held the end of the left hand to shake the body must be in good condition, stable and secure balance
The fair is not that it would be a gamble to tighten or release must be used to pull it toward the mouth and always ready for a shake out while tightening with
It should be a fair adjustment of the mouth is not before such as a Ring or a fair shake his mouth; and if a fair use is not a fair use, and then select the type of adjustment such as a busy slide instead
The use of the mouth to be fair to be fair, as a slide or a fair แป๊ป must be held to the mouth of the slide is attached to the user can always use
to be fair. The mouth. mouth-to shake the head, tighten the knots before then tighten exert
the mouth and the handle of a busy must be dry without oil or grease
tighten the knots or the screw in a narrow or deep, use a fair Bob because of his mouth to be fair to Bob long will be able to insert it into the hole, cramped.
When you head to shake must be in the same plane the head knots or screw head
should not be used to be kind of busy mouth. The head knots or the screws that will be used again, because the knots or the screws will be out of shape
The store should be a fair will be a place where only the store dry and free from grease or oil should be used if you will be good to hang out with an urn