4.The warp, the thread, we need to put a gong and grind wear spit Very little is the discretion of the grind, in which each may use multiple spit When the desired. The arrangement of the yarn from the spitIs the yarn back and forth between the latch of the canal flow forecast. From bottom to top and from top to bottom) were enough to bring a warp. Width = Mi we tied up by counting the lines to fit or less teeth, bogIf there are a lot of overflowing from the grooves bog which than necessary. When you're done using a rope dipped head end warp on the latch are easy to separate the line with you if the warp color when taken out can be split equally.A set consists of the rest of the last yarn weaving Bog with hundreds of yarn through groove teeth in full, and the end of the cloth is located on the other side of the HMM, ส่วนมากจะ left about 4-5 cm)
.To investigate to find one line from the edge of one side fire till the end of the other side, if the warp and be careful special because if find number of lines is not equal to that we set to make at the AMA's or beautiful.Then dye back on top and attached to the top of the stir fry a few projects. In this process, the young and he must นำไม้ม do penetrate laces bog laces. Wood end both to hang on to the project a few can move back and forth. At the same time, he 1 sets have 2.Before weaving to tight warp while the tense, it will provide a warp with the comb comb or convert from the beginning or end ติดับ him out a few to make warp is arranged in order, easy to move forward!
การแปล กรุณารอสักครู่..
