แผนกช่Analog Input Demonstrates ana

แผนกช่Analog Input
Demonstrates analog input by reading an analog sensor on analog pin 0 and
turning on and off a light emitting diode(LED) connected to digital pin 13.
The amount of time the LED will be on and off depends on
the value obtained by analogRead().

The circuit:
* Potentiometer attached to analog input 0
* center pin of the potentiometer to the analog pin
* one side pin (either one) to ground
* the other side pin to +5V
* LED anode (long leg) attached to digital output 13
* LED cathode (short leg) attached to ground

* Note: because most Arduinos have a built-in LED attached
to pin 13 on the board, the LED is optional.
างไฟฟ้ากำลัง

ผลลัพธ์ (อังกฤษ) 1:

Analog Input Analog ช่ Department Demonstrates by reading an input
analog on analog sensor pin 0 and turning a light on and off
emitting diode (LED) connected to digital pin 13. amount of the time The powerful LED will be on and off depends on the value obtained by analogRead
()
.
The circuit: analog input Potentiometer attached to *
0
* in the center of the pin to pin analog potentiometer
. * One side pin (either one) to the other side ground to pin
*
* 5V LED anode (long leg) attached to digital output 13
* LED cathode (short leg) attached to ground

* Note: because most Arduinos have a built-in LED on pin attached to the 13
board, the LED is optional.
ngafaifa are.

ผลลัพธ์ (อังกฤษ) 2:

Department of Visual Analog Input
Demonstrates analog input by Reading an analog SensoR on analog pin 0 and.
Turning on and off a light emitting diode (LED) Connected to Digital pin 13.
The amount of time The LED Will be on and off depends on.
The value obtained by AnalogRead (). The Circuit: * Potentiometer attached to analog input 0. * Center pin of The Potentiometer to The analog pin. * One Side pin (either One) to Ground. * The Other Side pin to + 5V. * LED anode (long Leg). attached to Digital output 13 * LED cathode (Short Leg) attached to Ground. * Note: Because Most Arduinos Have a Built-in LED attached. to pin 13 on The board, The LED is optional. than electric

ผลลัพธ์ (อังกฤษ) 3:

The help Analog Input
Demonstrates analog input by reading an analog sensor on analog pin 0 and
turning on and off a light. Emitting diode (LED) connected to digital pin 13.
The amount of time the LED will be on and off depends on
the value obtained. By analogRead ().


* The circuit Potentiometer attached to analog input 0
* center pin of the potentiometer to the. Analog pin
.* one side pin (either one) to ground
* the other side pin to 5V
* LED anode (long leg) attached to digital output. 13
* LED cathode (short leg) attached to ground

* Note: because most Arduinos have a built-in LED attached
to pin 13 on. The board the LED, is optional.
work for electric power