Image 3 the adhesive Tex-LiftHow to clear silicone C Place the magnetic dust powder onto the finger joints, finger joints to the alias alias appear. . Apply the sheets that have been drilled, there are bigger than a little finger passive joints. Placed on the finger joints will be collected to get the thickness of the clear silicone that fits in size due to the transparent silicone, this would have a very quickly and viscosity, it is difficult for a tree frog, and then use the infusion mix (Automix Casting Silicone) transparent silicone injection into the next finger joints to inject enough coated finger joints to be concealed. Wood finishing, coating, clear silicone on the finger joints alias. When the clear silicone to dry. Cut the clear tape.The right amount of Be mounted on sheets of transparent silicone with phantom fingerprint stick, do not press the clear tape, stick with clear silicone pads. Gently peel the tape clear silicone sheets are stuck up and bring on the paper form to keep the finger joints. Alias for the case of curved surfaces need silicone coated, heavy on the surface is not smooth because the clear tape to stick down on a sheet of clear silicone finger joints are concealed. Copy must be made transparent silicone sheets with patterns. Phantom fingers stuck out of place on a paper form to keep the footprint of phantom fingerprint and then clear activated tape transcribed. Presenting research at the graduate level 4 282 times the Graduate School of fine arts University.
การแปล กรุณารอสักครู่..
![](//thimg.ilovetranslation.com/pic/loading_3.gif?v=b9814dd30c1d7c59_8619)