An precision monitoring and adjustment.Step 1: clean the mouth of the temple, the paper put between the soft core (Anvil) and the axis (Spindle) Temple. Rotation axes, Wagga, titkradat and scroll to the paper, both sides of the mouth clean.Step 2: use the left hand grip the casing rotation scale of measurement (Thimble) using adjustable wrench tightening the right to lock. Because the scroll casing casing impact measurement axis is the axis of measurement.Step 3: rotate, scale, rotate, measure the casing of the axis axis measurements is exposed to view the Wagga scale exactly zero? If not, rotate, scale, adjust the primary copy (or Barrel Sleeve).Step 4 rotate the axis Wagga backwards without the rotating measuring scale STC ...Step 5 use the left hand grip the casing of the scale, rotate, rotate the collar right metric impact (Ratchet stop).Step 6 use a wrench tightening the lock at the bottom of the scroll casing impact (Ratchet) again.How to measure a hole circle must try rocking micrometer across,. The highest measured value and must try to dayok on the tires so the smallest measuring values.How to measure square hole is the position micrometer. In both the horizontal and vertical measurements and measurements.
การแปล กรุณารอสักครู่..
