Thin film coating samat pour kullu bikini on, ride the material serves as a poly-IM mid. By r. a. famaek nit Ron could use the business target foe Tehran sapat samat (99.99%), pour the kullu ride diameter 3 inches is the distance between the target and the material support of 50 mm. prior to installing the parts of the image taken mid to ultra sonic in alcohol for a period of 15 minutes in order to eliminate dirt and clean the surface of the.Piece of work Given the power to target. Bi 2 Te 3 is a 45 Watt surface coated with a pressure of 2 × 10-5 mbar and the pressure used in the coating film is 5x10-3 mbar using gas argon coating, 30 minutes from the time it take to steam at different temperatures (300, 350 and 400° C) under a pressure of nitrogen gas atmosphere (6 x 10-3 mbar) 1 hour. Some of the films that have been brought to Crystal structure analysis. Using the tester of x-ray diffraction (XRD, X-ray diffraction D8-Discover Bruker brand models) from which the CuK α x-ray. 1.54056 Angstrom wavelength, the songkrat high resolution electron microscope (Scanning Electron Microscope, Field Emission FE-SEM version JSM-7001F) by using the Secondary Electron Detector measured Imaging head comes out in Secondary Electron Image (SEI) and a complex analysis of the device that is connected to power (Energy Dispersive X-Ray Spectrometer, EDS), expressed as a power spectrum of any element with a specified proportion of the quantity of each component and measure the properties of dielectric films, Thermo way using meter electrical properties (Seebeck Coefficient/Electrical Resistance Measurement System, ZEM-3 ULVAC-RIKO brand).
การแปล กรุณารอสักครู่..