In general, the oil is responsible for lubricating the engine's parts. And features The film helps to avoid direct friction, especially if the engine is accelerated even more traction and wear. Oil will help reduce friction and wear it. Make the engine run more efficiently, and also continue to help save fuel, too. The addition of a lubricant Can circulate to different parts of the engine also helps cooling. Help clean engine parts. And also the gap between the components to prevent leakage of gas to a pressure leak. The engine Fully , even using high quality oil regardless. It must also be taken at the time of change. When I used to have deteriorated. And reduce the deterioration of the properties of filth that comes included in the oil leakage into the air like dust, the air filter. Intake manifold and oil filler cap soot from combustion is incomplete. Steam from fuel combustion acids resulting from the merger of some gas and water. Fuel to burn out, scrap metal caused by wear and tear. Gums caused by a combination of fuel and oxygen in the air at high temperatures, these are collected in the pan. Once more it accumulates into a lubricant degradation and can not lubricate as well. May cause problems of wear and cause engine damage. Therefore, it is necessary to change the oil to remove dirt and impurities were removed from the engine to the body. To help protect the engine And extend the life of the engine for longer period of time to change the oil. Depending on the nature and condition of the engine. Including the nature of the work or the use of the rider. In general, try to follow the Handbook. Another important and one should always check the oil level and top up regularly. If the amount of oil is not enough work, it is not full and the engine. Processes as well
การแปล กรุณารอสักครู่..
