The major components of a wind turbine for electricity production.1. the rotor as wind energy and mechanical energy is changed to adhere to a set of rotating axis and rotation axis to the transmission shaft strength from the axis of rotation.2. shaft rotation axis. Get inspired from the axis of rotation of the rotor and transmission gear system to modify speed dial and drive the generator.3. the transmission system, modify, and control the rotational speed. Between the shaft axes rotate with the shaft of the generator.4. transmission system, modify, and control the rotational speed. Between the shaft rotation of the turbine. When the wind speed exceeds the ability of the turbine and during repair, maintenance.5. generator will make that change energy mechanical energy.6. electric control system A computer system is used to operate and control power into the system.7. the machine is not running at large wind turbines is vital intercession. Use packaged systems wind turbine generator gear system, 8. brake systems and control systems.9. the anemometer is a pointer to the size of the wind speed to connect the signal cable to the computer system.Wind direction meter pointer is the direction of the wind with a cable to connect a computer system so that the computer will control the other mechanisms properly.10. the axis of rotation, the wind direction is given as the control of rotation, so that the rotor is the direction the wind by an electronic system that connects with relation to the wind direction meter at the top of the machine.Pole is a bear that PLA guided above and are located on the area of construction engineering according to the principle of correctly.
การแปล กรุณารอสักครู่..