System components for large wind turbines produce electricity.Major components of a typical wind turbine systems may be categorized as follows: 1. power the receiver as a wind vane and turn them into mechanical energy, which attaches to spindle set and sent a force from spindle to spindle axle. 2. spindle shaft which is driven from the spindle and rotor transmission system is to rotate and spin the generator. 3. the transmission system, which are the rooms, modify, and control the rotation speed. Between the shaft spindle shaft with เคริ่อ of ngakamnoet electric. 4. the engine room, which has a large wind turbines, are important and. Use packaging systems such as wind turbine generators, transmission, braking and control systems. 5. the generator acting as a mechanical power switch power. 6. electric control system, which uses a computer control system for the electrical work and log on. 7. the braking system control is used as the mechanism to stop the rotation of the impeller and turbine spindle shaft. When it gets beyond the ability of wind speed turbine that will be received during the repair, maintenance and.8. neck rotation axis get wind direction as a control room to spin the impeller get wind direction by electronic systems that connect, a relationship with tiller received the wind direction at the top of the machine.9. gauge wind speed and wind direction, which cable connection to log on to the computer as an indication of the size of the wind speed and direction, so that the computer will control the other mechanisms properly.10. wind turbine pole is a bear that is a section above.
การแปล กรุณารอสักครู่..