ทำการตรวจสอบด้วยเกจตรวจสอบเกลียวชิ้

ทำการตรวจสอบด้วยเกจตรวจสอบเกลียวชิ้นงานตามปกติ แต่งานที่เกิดปัญหาเป็นงานที่ตรวจสอบพบว่าเกลียวเสีย (หมุนไม่เข้า) จึงทำการแก้ไขแต่ในการแก้ไขพนักงานไม่ได้ตรวจสอบด้วยเกจ Nogo จึงทำให้มีงานเสียหลุดไป

ผลลัพธ์ (อังกฤษ) 1:

Inspect the workpiece with a thread gauge as usual. But the work that caused the problem was the work that was checked and found that the threads were broken. (Can't rotate) so fix it. But in the correction, the employee did not check with the Nogo gauge, causing defective work to be missed.

ผลลัพธ์ (อังกฤษ) 2:

Check whether the thread of the workpiece is normal with a measuring gauge.
However, the work that caused the problem was to check if the threads were damaged (unable to rotate), so repairs were made.
However, during the correction process, employees did not use Nogo instruments for inspection, resulting in lost work.

ผลลัพธ์ (อังกฤษ) 3:

Check with conventional workpiece thread check nut.
However, the problem task is the inspected task, and the thread is found to be damaged (unable to rotate), so it is repaired.
However, during the correction, employees did not check with Nogo gateway, resulting in lost work.