1. specific features-definition Broadcast TV Analyzer The main requirements. 1. a measuring instrument and the analysis of the TV signal. DVB-T2 Support system and single mode Transmission multi-PLP 2. measuring signal analysis can be at least as follows: Level, Constellation Diagram, Shoulder Attenuation, Transport Stream Analyzer, Spectrum.3. to display the value of the measurement is not less than the following Constellation, Multi-Channel impulse response, PLP Parameter (Echo Pattern), MER, BER, EVM, and Power. 4. measuring values can be displayed Information L1-pre signaling, PLP, L1-post signaling. 5. measuring values can be represented Transport Stream: 1st 2nd 3rd priority, priority, priority, TS ID match, TS modification and SFN Sync. 6. the measurement values can be stored in the internal memory or external memory and can send the measurement values over USB or LAN (RJ45). 7. Audio and Video signals can be decoded at the measuring device to the external Monitor display. 8. is the Test Drive Software can save the results of measuring the position of signals and measuring performance to General results display in a map with an external Computer. 9. measuring instruments can display LCD Color screen measuring 640x480 pixel Resolution with LED or box type measuring instruments, metal wheels, Fender, there are strong bonding with the use in case of a move. 10. have a GPS system in a machine with external antenna. 11. Passive/Active type with directional antenna antenna 20 MHz frequency to 7500 MHz (with the antenna holder) used in conjunction with TV Analyzer with tripod antenna height of not less 10-meter cable length less than 15 metres. 12. a dealer must bid in Thai document (s) must be certified by the dealers attached with the bid.
การแปล กรุณารอสักครู่..