Working principle of steam machinery is as follows: 1. the operation of the steam machine is boiling water boil in "Kettle (Boiler)" boiling water will change the status of the leoklai is a high pressure steam. 2. remove high pressure steam is then used to drive the Pistons push the piston moves until birth and have used as a source of various machines we call this steam engine is referred to as the "external combustion engine (External Combustion Engine)," he said.Working cylinder steam machine that this locomotive is a double acting steam is to push both sides of the 2-cylinder piston by means of the same work, in which the energy provided by the high pressure steam (in red in the picture), which is derived from water, firewood, wood, Tom. Coal or fuel oil The blue section is the low pressure steam.2 strokes The second stroke the tongue starts turn to give this out as exhaust with a rotating wheel of pain and pressure of steam, which added another push one side of the piston causes the piston moves back to the left. This time, the Pistons push the steam full expansion to become the exhaust to flow out. The original channel through the open valve to on the exhaust steam chest bin and then released to Ares. The Pistons moved here until nearing the end on the left hand side. When the Pistons finally walked to the left, then it will follow the rhythm that one further. It works like this: for the opposite would be identical, but would work to. Similarly for the other cylinder, it will work like this, but it works by alternating or most authentic design. Can be seen that if the train started moving for the first time. If the wheel is in a bad position. When high pressure steam enters the cylinder The train may be ahead or backwards, by the driver could not control so that they can control the train forward or backward. Pump shaft position and push the left and right wheels wheels wheels are different angles 90 degrees.
การแปล กรุณารอสักครู่..
