Fisher & Paykel Appliances Product

Fisher & Paykel Appliances
Product Development
Specification Description: Specification Number: Revision:
Hot-dip zinc-coated steel (Galvanized) RoHS 598004 3


1. Scope

This specification details the requirements of Hot-dip zinc-coated steel (Galvanized), Cold rolled steel sheets, Commercial quality RoHS.


2. Referenced Documents

-          JIS G 3302 Hot-dip Zinc-coated steel sheets and coils
-          ASTM A 653/ A 653M – 08 Steel Sheet, Zinc-coated (Galvanised) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
-          EN 10142 Continuously hot-dip zinc coated low carbon steel sheet and strip for cold forming

3. Material Type

-          Cold Rolled Galvanised Steel, Cold rolled steel sheets, Commercial quality
§  Zinc coated: minimum coating weight 100g/sq.m
§  Coating Finish (Spangle): Minimized
§  Surface Treatment: Chemically passivated, Chromate-free, RoHS compliant
§  Surface Quality (Skin passed): Preferred
§  Oiling: Unless otherwise specified, the non-alloyed coating shall be unoiled

o   JIS G 3302 – SGCC Z10 Z NC
§  SGCC: Cold reduced base metal, Commercial quality (Yield strength 205MPa min, Tensile strength 270MPa min)
§  Coating weight Z10 (total mass on both surfaces): Minimum Average coating mass in triple spot test 100 g/sq.m
§  Coating finish: Z minimized spangle
§  Chemical Treatment NC: Chromate-free, RoHS compliant

o   ASTM A 653/ A 653M – CS Type B Z120 (G40 for Inch-Pound units) Minimised spangle, Chemically treated (Chromate free)
§  CS: Cold reduced base metal, Commercial Steel (Yield strength 205 MPa min, Elongation 20% min)
§  Coating weight Z120 (total mass on both surfaces): Minimum Average coating mass in triple spot test 120 g/sq.m
§  Coating finish: Minimized spangle
§  Chemical Treatment: RoHS compliant for the prevention of fingerprint, white rust in transit and storage

o   EN 10142 – DX51D+Z Z100 M C
§  DX51D: Cold reduced base metal, Bending and profiling quality (Tensile strength 270-500 MPa, Elongation 20% min)
§  Coating weight Z100 (total mass on both surfaces): Minimum Average coating mass in triple spot test 100 g/sq.m
§  Coating finish: M minimized spangle
§  Chemical Treatment: RoHS compliant for the prevention of fingerprint, white rust in transit and storage
-           
4. Approved vendors

-          Steel Manufacturer: JFE Steel Corporation
o   Type: Galvanised Steel Sheet (Base Metal Cold Rolled, Commercial Quality)
o   Material Designation: Galvazinc JIS G 3302 SGCC Z10 JC, Coating weight Z10, Z Minimized spangle, NC Chemical treatment (JC)


-          Steel Manufacturer: TBA
o  Type: Galvanised Steel Sheet (Base Metal Cold Rolled, Commercial Quality)
o  Material Designation: ASTM 653 CS Type B Z120, Coating weight Z120, Minimised spangle, Chemical treatment RoHS compliant


-          Steel Manufacturer: TBA
o  Type: Galvanised Steel Sheet (Base Metal Cold Rolled, Bending and profiling quality Quality)
o  Material Designation: EN 10142 DX51D+Z Z100, Coating weight Z100, M Minimised spangle, C Chemical treatment RoHS compliant


REVISION HISTORY

Revision ECN Change: Change By: Change Date:
2 Add ASTM and EN Spec materials S Kim 42300
3 Correct Mechanical properties in JIS and EN S Kim 42569

ผลลัพธ์ (อังกฤษ) 2:

Fisher & Paykel Appliances
Product Development
Specification Description: Specification Number: Revision:
Hot-dip zinc-coated Steel (Galvanized) RoHS five hundred and ninety-eight thousand and four 3 1. Scope This Specification Details Hot-dip zinc-the requirements of coated Steel (Galvanized), Cold rolled Steel. Sheets, Commercial quality RoHS. 2. Referenced Documents - JIS G 3302 Hot-dip Zinc-coated Steel Sheets and coils - ASTM A 653 / A 653M - 08 Steel Sheet, Zinc-coated (Galvanised) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process. - EN 10142 Continuously hot-dip zinc coated low Carbon Steel Sheet and strip for cold forming 3. Material Type - Cold Rolled Galvanised Steel, Cold rolled Steel Sheets, Commercial quality § Zinc coated: Coating minimum weight 100g / Sq.m § Coating Finish (Spangle): Minimized § Surface Treatment: Chemically passivated, Chromate-free, RoHS compliant § Surface. quality (Skin Passed): Preferred § Oiling: Unless otherwise Specified, the non-alloyed Coating Shall be Unoiled o JIS G 3302 - SGCC Z10 Z NC § SGCC: Cold reduced Base Metal, Commercial quality (Yield strength 205MPa min, Tensile strength 270MPa. min) Z10 § Coating weight (total mass on both surfaces): Minimum Average Coating mass triple spot in Test 100 G / Sq.m § Coating Finish: Z minimized spangle § NC Chemical Treatment: Chromate-free, RoHS compliant o ASTM A 653. / A 653M - CS Type B Z120 (G40 for Inch-Pound Units) Minimised spangle, Chemically treated (Chromate free) § CS: Cold reduced Base Metal, Commercial Steel (Yield strength 205 MPa min, Elongation 20% min) § Coating weight. Z120 (total mass on both surfaces): Minimum Average Coating mass triple spot in Test 120 G / Sq.m § Coating Finish: Minimized spangle § Chemical Treatment: RoHS compliant for the Prevention of Fingerprint, White Rust in transit and Storage o EN 10142. - DX51D + Z Z100 MC § DX51D: Cold reduced Base Metal, profiling and quality Bending (Tensile strength two hundred seventy to five hundred MPa, Elongation 20% min) § Z100 Coating weight (total mass on both surfaces): Minimum Average Coating mass in triple spot. Test 100 G / Sq.m § Coating Finish: M minimized spangle § Chemical Treatment: RoHS compliant for the Prevention of Fingerprint, White Rust in transit and Storage -            4. Approved vendors - Steel Manufacturer: JFE Steel Corporation o Type: Galvanised Steel Sheet (Base Metal Cold Rolled, Commercial Quality) o Material Designation: Galvazinc JIS G 3302 SGCC Z10 JC, Coating weight Z10, Z Minimized spangle, NC Chemical Treatment (JC). - Steel Manufacturer: TBA o Type: Galvanised Steel Sheet (Base Metal Cold Rolled, Commercial Quality) o Material Designation: ASTM 653 CS Type B Z120, Coating weight Z120, Minimised spangle, Chemical Treatment RoHS compliant - Steel Manufacturer: TBA o Type:. galvanized Steel Sheet (Base Metal Cold Rolled, Bending and profiling quality Quality) o Material Designation: EN 10142 DX51D + Z Z100, Coating weight Z100, M Minimised spangle, C Chemical Treatment RoHS compliant REVISION HISTORY Revision ECN Change: Change By: Change Date. : Add 2 ASTM and EN 42300 Spec Materials Kim S 3 Correct Mechanical properties in JIS S Kim and EN 42,569.