ฉันรักแปลThe work part zero point i

ฉันรักแปล
The work part zero point is set with reference to the
machine zero point M. In most cases the machine
zero point of a CNC vertical milling machine is located
above the left corner edge of the machine table
(see figure 51).
With the operations described below the distance is
specified between the machine zero point M and the
work part zero point W in the three coordinates X, Y
and Z. These values are then entered into the CNC
control.
Procedure
Starting situation:
The work part is adjusted and firmly clamped in the
machine table. All tools are gauged to each other.
The corresponding compensation values were entered
into the CNC control. The zero setting tool is
clamped and the spindle rotation is switched

ผลลัพธ์ (อังกฤษ) 1:

I love the translation.The work part zero point is set with reference to themachine zero point M. In most cases the machinezero point of a CNC vertical milling machine is locatedabove the left corner edge of the machine table(see figure 51).With the operations described below the distance isspecified between the machine zero point M and thework part zero point W in the three coordinates X, Yand Z. These values are then entered into the CNCcontrol.ProcedureStarting situation:The work part is adjusted and firmly clamped in themachine table. All tools are gauged to each other.The corresponding compensation values were enteredinto the CNC control. The zero setting tool isclamped and the spindle rotation is switched

ผลลัพธ์ (อังกฤษ) 2:

I love translating
The Work Part Zero Point is SET with Reference to the
Machine Zero Point M. In Most Cases the Machine
CNC Vertical Milling Machine Zero Point of a is located
above the left of the Machine EDGE Corner Table
(See figure 51).
With. Below is the Distance Operations described the
Specified between the Machine and the M Zero Point
Zero Point Work Part Three Coordinates W in the X, Y
and Z. These values ​​are then entered into the CNC
Control.
Procedure
Starting situation:
The Work Part is adjusted. and firmly clamped in the
Machine Table. All Tools are gauged to each Other.
The corresponding values ​​were Compensation entered
into the CNC Control. The Zero Setting Tool is
clamped and the spindle is Switched Rotation.

ผลลัพธ์ (อังกฤษ) 3:

I love translation
The work part zero point is set with reference to the
machine zero point M. In most cases the machine
zero point. Of a CNC vertical milling machine is located
above the left corner edge of the machine table
(see Figure 51).
With the operations. Described below the distance is
specified between the machine zero point M and the
work part zero point W in the three coordinates. X, the Y
.And Z. These values are then entered into the CNC
.

control Procedure Starting situation:
The work part is adjusted and. Firmly clamped in the
machine table. All tools are gauged to each other.
The corresponding compensation values were entered
into. The CNC control. The zero setting tool is
clamped and the spindle rotation is switched.