Printing offset
In the current system as a standard offset printing, printing is a commonly used popular print ground. Originates from a print by the discovery of a first-rate alua fledoe (Alois Senefelder) With the use of a bone, fat burned successfully terrazzo pads. Clammy or into an area where you do not want Visual born and then copy this into the inked by fat burning is to pick up the ink and crystalline water and water pressure, push the ink to mix when the paper went to print, and press the weight system passable. Print current ground stone print known have developed from stone slabs that pull people use thick and heavy, back to back. To print a sheet for a few hours, there was a change. From the use of force were a machine. The steam engine is ready to change the characteristics of the metal sheet of the prints is that light can be bent can be seen around, and have been used as a fabric, rubber (rubber printing) paper or printed materials are not exposed to mould (plate cylinder) directly. (Blandet cylinder) to the printing press (imoression cylinder) The name of this method was called when the initial '''-thokra the Lord '' (Lithography) as a Greek that means writing on a rock that further changes were set off (set-off) or '' offset '' (offset) Then prepare the next sheet in the ink spot The name of the Print method is called '' offset '' the Federal Emergency Management Agency at thokra (offset lithography) At present, many materials can be printed on the surface of paper, plastic or metal sheets, gauze weave.
การแปล กรุณารอสักครู่..