Step 1
mixture of sawdust (timber), sawdust, etc., but it is produced by a general. Concluded that the best rubber sawdust sawdust is not new, never. Should discard pile for about 7 days to be used. Supplements including rice bran mixed with lime proportion EM
procedure. 2.
Fill the water to about 70 percent, by removing sawdust mixed Tight and Notice 1. If water is seeping under the skin between the fingers. Show that too much water 2. When there is no running water, squeeze the skin between fingers to ignore if sawdust broken into 3 pieces that fit, but if you ignore it. Sawdust agglomeration, the less water to step 3
when mixed successfully. Fill sawdust bag for cultivation in particular. Enter the weight is 800 - 900 gram bag loosely gathered jab tightly enough to the ground, then put the bottleneck Then I close the lid tightly. Take a steam temperature of 100 ° C for 4 hours, then open the door. Leave it for about 24 hours, so the mushroom planting
process. 4
After we steamed before infection with a minimum temperature of 90 ° C for at least 3 hours, then it's time to drop the infection was believed, but calmly 1. to set aside at room temperature. 2. Prepare for not less than 24 hours were ready to drop. 3. Prepare a ready 4. The equipment available such as alcohol, rubber bands, paper 4 x 4 inch
step 5 after planting flowers, fungi, and then turn the cubes were then incubated for about 20- 25 days, only to find that out of the way, not the sun. Not to rain the wind does not blow, no insects, no rats ventilated for greenhouses, mushroom priority to the cold, damp guests uncork the bottle neck pull out. I held the bag to its original condition.
การแปล กรุณารอสักครู่..