อย่ายิ้มมากไปเดี๋ยวคนอื่นหาว่าเป็นบ

อย่ายิ้มมากไปเดี๋ยวคนอื่นหาว่าเป็นบ้า

ผลลัพธ์ (จีน) 1:

不要笑得太多，别人会让你发疯。

ผลลัพธ์ (จีน) 2:

Use and Cure Information
This product is a ready to use 1-Part system. It is recommended
that liquid versions be thoroughly mixed prior to use, particularly
thermally conductive products which are supplied in tubs or pails.
Ensure that all surfaces of the substrate are clean and
degreased. The work area should be free of contaminants such
as organic compounds of sulphur, phosphorus, nitrogen and tin,
which act as catalyst poisons.
The rate of cure will depend on how long it takes for the sealant to
reach the required curing temperature. Small beads of 1 to 2mm
diameter, used as formed-in-place gaskets, can be cured quickly
with hot air guns e.g. paint stripper types. With larger sections of
sealant or when using as an encapsulant, cure times will increase
and the use of an oven will be needed. Increasing the temperature
will reduce cure times and maximum cure temperature should not
exceed 200ºC. All times are based on the actual time in an aircirculating
oven at the stated temperature. Note: Improved
adhesion is achieved by post cure at 120 to 150ºC for 1 to 2
hours.

ผลลัพธ์ (จีน) 3:

不要疯狂地摆动。