Using a microscope
using a light microscope (Light microscope) is used as
one. Place the camera on the floor with a smooth base to muzzle erect
two. Rotate the objective lens (objective lens) at the lowest magnification is exactly the caliber
third. Adjust the platen glass object into a barrel full glare
4. Slides to study palletized material. The object in the middle area of the light. Then look along side the dock object gradually adjust knob rough (coarse adjustment knob) to move the barrels near the object to be studied more. By careful not to touch the objective lens glass slide off. Some microscopic images when dial is moving up and down the rough barreled toward the objective lens. But some cameras docking the object is moved down toward the objective lens
5. Looking through Les close eye (eyepiece) into the barrel with a dial-up slowly until a rough image object to be studied is quite clear. Then switch to rotate the image resolution (fine adjustment knob) to adjust image contrast. May slide back and forth, so something like the elephant in the middle of the line, barreled
6. To enlarge the picture up. To rotate the objective lens with high magnification barrel into alignment. And not have to move the slide And turn the knob to make things clearer picture of
seven. The light source into a barrel or less. A rotating disc diaphragm (diaphragm) exposure needed
microscope used in the school has the objective lens various times as one of the two great or three at a magnification different to be a low magnification. Best (x4) magnification Medium (x10), and decompress high (x40, x80) or high magnification of up to x100 the magnification of the lens, it generally is generally x10, but some cameras is x5. or x15 magnification of the microscope calculated by multiplying the magnification of the objective lens with a magnification of the lens. Which is marked on the lens
การแปล กรุณารอสักครู่..
