H. PERFORMANCE OPTIMIZATION CCBOOT

H. PERFORMANCE OPTIMIZATION
CCBOOT 3.0

















PERFORMANCE OPTIMIZATION:
Improve the Win7 Boot Speed
2013/04/10 00:11
When the diskless client booted to the Windows 7 logo (the flower), it will hang on for long time. At the same time, the server shows that the client read data stopped at about 40-42M.
1) Download win7-boot-speed.zip
http://www.ccboot.com/download/win7-boot-speed.zip
2) Boot the client with super client.
3) Extract the zip file and run the reg file on the client.
4) Shutdown the client and disable super client.
5) Enable AHCI in BIOS. For more details, please refer to "Enable AHCI in BIOS".
Enable AHCI in the Server BIOS
2013/04/10 00:05
Opening the AHCI function can improve the writing performance of the disk of the server. For details, please refer to the "Server Hardware Requirements". The following are the methods of opening AHCI function.
1) In the process of starting up the computer, keep pressing the "Delete" button of the keyboard, enter the "BIOS" setting.
2) Find the SATA interface setting option, change the "IDE" mode to "AHCI" mode; press the "F10" to save and exit.(Figure 1 1)
Notes: Because the BIOS versions of the main board are not the same, the positions of the "SATA interface" options are different. Recommend you can read the main board manual, and then modify the BIOS.
If the server has installed the operation system, you can set the AHCI mode in the BIOS, it will lead to the blue screen of death. The solution is as follows:
1) First set back to the original normal mode.
2) Start the server.
3) Click the "Start" button, enter "reedit" in the "Run" edition box, and click the "Enter" button.
4) In the pop-up "Registry Editor" window, position:
5) HKEY_LOCAL_MACHINESYSTEMCurrentControlSetservicesmsahci, and then click the "Start". (Figure 1 2).
6) It will pop up "Edit DWORD Value" dialogue box, enter "0" in the "Value data" edition box, and then click the "OK" button.(Figure 1 3)

Figure 1 3
Server Hard Disk Allocation
2013/04/09 13:59
Three SATA hard disks Use a SATA hard disk as the system disk of the server, which is divided into two partitions; install the server system in the C disk; install the CCBoot and store the image package in the D disk.
The other two SATA hard disks are used as the game disks, and the hard disks are composed of soft arrays; the disk letter is "E". Recommend not using the hard arrays.
Three SSD hard disks One is used as the cache disk; the disk letter is "S". If you want to use the "advanced SSD initialization" function of the CCBoot, the initialization process takes about 10 minutes.
The other two SSD hard disks are used as the "write-back" disks. All need to format. The disk letters are "I" and "J". Recommend not using any array pattern.
After allocating all the hard disks, you need to "format" all the hard disks. The steps are as follows:
1) Right-click the "Computer", clicks the "Manage".
2) In the pop-up "Computer" window, expand the "Storage" node; click the "Disk Management".
3) Right-click the disk, click "Format" to format the hard disk.(Figure 1 1)

Figure 1 1
4) It will pop up "Format" dialogue box, in the "Allocation unit size" combo box, select the "32K", then click the "OK" button.(Figure 1 2)

Figure 1 2

Server Cache Settings
2013/04/09 13:49
1.1 Reading Cache Setting of the Server.
The recommended configuration of 8G memory:
Cache Setting Memory Cache SSD Cache(80G)
Image 1024M 0
Game Disk 4096M 71680M
The recommended configuration of 16G memory:
Cache Setting Memory Cache SSD Cache(80G)
Image 1024M 0
Game Disk 8192M 71680M
The recommended configuration of 32G memory:
Cache Setting Memory Cache SSD Cache(80G)
Image 1024M 0
Game Disk 20480M 71680M
For details, please refer to: "Disk Cache Settings and Recommend".
1.2 Super Cache setting of the Write-back Disk
If you install super cache, please follow the parameters at below.
Cache Size Block Size Write-back Time
300-500M 32k 5 seconds

For more details, please refer to "Super Cache Installation".
Notes: If you haven't installed super cache on the server, please check "Enable System Write Cache" on the CCBoot settings.

Client Local Cache Settings
2013/04/09 13:39
Client Memory Size Local Cache
1G 128M
2G 348M
4G 1024M
8G 3072M
Client System Restore Points Optimization
2013/04/09 13:11
1) Right-click "Computer", select "Properties".
2) In the pop-up "System" window, click "Advanced system settings". (Figure 1 1)

Figure 1 1
3) In the "System Properties" dialogue box, click "Configure" button, and the click "System Protection" tab. (Figure 1 2)

Figure 1 2
4) In the pop-up "System Protection for WIN7" dialogue box, select the "Turn off system protection" button; click the "Max Usage" slider, drag to the left; the disk space usage is set to the lowest; then click "Delete" button, delete the recovery point, then click "OK " button. (Figure 1 3)

Figure 1 3
Client Services Optimization
2013/04/09 23:57
Operation steps:
1) Download files from the website: http://www.ccboot.com/download.htm
If the operating system is Win7, download win7opt.zip; if the operating system is WinXP, download winxpopt.zip.
2) Unzip the downloaded file, right-click "install.bat" file, select "Run as a administrator". (Figure 1 1)

Figure 1 1

The successful operation results. (Figure 1 2)

Figure 1 2
Client and Server UAC Optimization
2013/04/09 13:57
1) Click "Start" button, in the "Run" edition box, enter "msconfig", and press Enter key.
2) In the pop-up "System Configuration" dialogue box, select "Tools" tab, and then select "Change UAC Settings"; Click "Launch" button.


3) In the pop-up "User Account Control Settings" dialogue box, drag the slider down to set the UAC value for "Never notify".

Removing Win7 x64 Watermark
In the win7-64 system, after installing the CCBoot client, it will have the "test mode" of the watermark, which is displayed in the lower right corner.
The methods of removing watermark:
1) Download RemoveWatermarkX64.zip file from the CCBoot official website.
Download address: http://www.ccboot.com/download/RemoveWatermarkX64.zip
2) Start the client with the super user mode. (in the case of PC101)
3) Copy RemoveWatermarkX64.zip file to PC101, and extract the file, then double-click to run RemoveWatermarkX64.exe.
4) In the "Command line" window, enter "Y",and click the "Enter" button, run the program. (Figure 1 1)

Figure 1 1
5) After the successful operation, close the client PC101.
6) On the CCBoot of the server, uncheck "super user".

ผลลัพธ์ (อังกฤษ) 2:

H. PERFORMANCE OPTIMIZATION
CCBOOT 3.0 PERFORMANCE OPTIMIZATION: Improve The Speed ​​Boot Win7 4/10/2013 twelve eleven a.m. When The Client diskless booted to The Windows 7 Logo (The Flower), IT Will Hang on for long time. At The Same time, read The Client Server The Data Shows that stopped at About 40-42M. 1) Download Win7-Boot-Speed.zip. Http://www.ccboot.com/download/win7-Boot-Speed.zip 2 ) Boot with Super Client The Client. 3) Extract The ZIP file and Run The Reg file on The Client. 4) Shutdown and Disable Super Client The Client. 5) Enable AHCI in BIOS. For more details, please refer to "Enable AHCI in BIOS". Enable AHCI in The Server BIOS 10/04/2013 twelve five a.m. Opening The AHCI function Can Improve The Performance of The Writing of The Disk Server. For details, please refer to the "Server Hardware Requirements". The following are The methods of opening AHCI function. 1) In The Process of Starting up The Computer, Keep Pressing The "Delete" button of The Keyboard, enter The "BIOS" Setting. 2) Find The SATA Interface Setting Option, Change The. "IDE" mode to "AHCI" mode; Press The "F10" to Save and Exit. (Figure 1 1). Notes: Because of The The main board BIOS versions are Not The Same, The positions of The "SATA Interface" Different options are. The main board recommend You Can read Manual, and then Modify The BIOS. If The Server has installed The operation System, You Can Set The AHCI Mode in The BIOS, IT Will Lead to The blue Screen of Death. The Solution is As follows: 1) First Set back to The Original normal Mode. 2) Start The Server. 3) Click The "Start" button, enter "reedit" in The "Run" Edition Box, and Click The "Enter". button. 4) In The pop-up "Registry Editor" Window, position:. 5) HKEY_LOCAL_MACHINESYSTEMCurrentControlSetservicesmsahci, and then Click The "Start". (Figure 1 2). 6) It Will pop up "Edit DWORD Value" Dialogue Box, enter "0" in The "Value Data" Edition Box, and then Click The "OK" button. (Figure 1 3). Figure 1 3 Server Hard Disk Allocation 4.9.2013 13:59 Three SATA Hard Disks Hard Disk Use As a SATA Disk The System of The Server, which is divided Into Two partitions; install the server system in the C disk; The CCBoot and Install Package Store The Image in The D Disk. The Other Two SATA Hard Disks are Used As The Game Disks, and The Hard Disks are composed of Soft Arrays; the disk letter is "E". The Hard Not recommend using Arrays. Three SSD Hard Disks One is Used As The Disk cache; the disk letter is "S". IF You Want to Use The "advanced SSD Initialization" The function of CCBoot, The Initialization Process Takes About 10 minutes. The Other Two SSD Hard Disks are Used As The "Write-back" Disks. All need to format. The disk letters are "I" and "J". Not recommend using any array pattern. After allocating all The Hard Disks, You Need to "format" all The Hard Disks. The Steps are As follows: 1) Right-Click The "Computer", The Clicks "Manage". 2) In The pop-up "Computer" Window, Expand The "Storage" node; Click The "Disk Management". 3) Right-Click The Disk, Click "Format" to format The Hard Disk. (Figure 1 1). Figure 1 1 4) It Will pop up "Format" Dialogue Box, in The "Allocation Unit. size "Combo Box, Select The" 32K ", then Click The" OK "button. (Figure 1 2). 1 Figure 2 Server Cache Settings 9.4.2013 13:49 Reading 1.1 Setting of The Cache Server. The recommended configuration of 8G memory: Cache Setting Memory Cache SSD Cache (80G). Image 1024M 0 Game Disk 4096M 71680M The recommended configuration of 16G memory:. Cache Setting Memory Cache SSD Cache (80G). Image 1024M 0 Game Disk 8192M 71680M The recommended configuration of 32G memory:. Cache Setting Memory Cache SSD Cache (80G). Image 1024M 0 Game Disk 20480M 71680M For details, please refer to: "Disk Cache Settings and Recommend". 1.2 Super Cache Setting of The Write-back Disk. If You Install Super cache, please follow The Parameters. Below at. Cache Block Size Size Time Write-back. 300-500M 32k 5 seconds For more details, please refer to "Super Cache Installation". Notes: If You Have Not installed Super cache on The Server, please Check "Enable Write System. Cache "on The CCBoot settings. Client Local Cache Settings 04.09.2013 1:39 p.m. Local Client Cache Memory Size 128M 1G 2G 348M 1024M 4G 8G 3072M Optimization Client System Restore Points 09/04/2013 1:11 p.m. 1) Right-Click "Computer", Select "Properties". 2) In The pop-up "System" Window, Click "Advanced System settings". (Figure 1 1) Figure 1 1 3) In The "System Properties" Dialogue Box, Click "Configure" button, and The Click "System Protection" tab. (Figure 1 2) 1 2 Figure 4) In The pop-up "System Protection for WIN7" Dialogue Box, Select The "Turn off System Protection" button; click the "Max Usage" slider, drag to the left; the disk space usage is set to the lowest; then click "Delete" button, delete the recovery point, then click "OK" button. (Figure 1 3) Figure 1 3 Client Services Optimization 9.4.2013 23:57 Operation Steps: 1) Download files from The Website: Http://www.ccboot.com/download.htm. If The operating System is Win7,. download win7opt.zip; IF The operating System is WinXP, download Winxpopt.zip. 2) Unzip The Downloaded file, Right-Click "install.bat" file, Select "Run As a administrator". (Figure 1 1) Figure 1 1 The Successful operation results. (Figure 1 2) Figure 1 2 Client and Server Optimization UAC 04.09.2013 1:57 p.m. 1) Click "Start" button, in The "Run" Edition Box, enter "msconfig", and Press Enter Key. 2) In the pop-up "System Configuration" dialogue box, select "Tools" tab, and then select "Change UAC Settings"; Click "Launch" button. 3) In The pop-up "User Account Control Settings" Dialogue Box, drag down to Set The UAC Slider The value for "Never Notify". Win7 x64 Removing Watermark In The Win7-64 System, After installing. The CCBoot Client, IT Will Have The "test Mode" of The watermark, which is displayed in The Lower Right Corner. The methods of Removing watermark: 1) Download file from RemoveWatermarkX64.zip CCBoot The Official Website. Download address: http: / /www.ccboot.com/download/RemoveWatermarkX64.zip 2) Start with The Client The Super user Mode. (In The Case of PC101). 3) Copy file to RemoveWatermarkX64.zip PC101, and Extract The file, then double-Click to Run RemoveWatermarkX64.exe. 4) In The "Command Line" Window, enter "Y", and The Click. "Enter" button, run the program. (Figure 1 1) Figure 1 1 5) After The Successful operation, close The Client PC101. 6) On The CCBoot of The Server, uncheck this item "Super user".

ผลลัพธ์ (อังกฤษ) 3:

H. PERFORMANCE CCBOOT 3.0 OPTIMIZATION



















PERFORMANCE OPTIMIZATION Improve the Win7 Boot Speed
2013 / 04 / 10. 00: 11
When the diskless client booted to the Windows 7 logo (the flower), it will hang on for long time. At the, same time. The server shows that the client read data stopped at about 40-42M.
1) Download win7-boot-speed.zip
http: / / www.ccboot.com / download / win7-boot-speed.zip
.2) Boot the client with super client.
3) Extract the zip file and run the reg file on the client.
4) Shutdown the client. And disable super client.
5) Enable AHCI in BIOS. For more details please refer, to "Enable AHCI in BIOS."
Enable AHCI in. The Server BIOS
2013 / 04 / 10 00: 05
Opening the AHCI function can improve the writing performance of the disk of the, server. For, detailsPlease refer to the "Server Hardware Requirements." The following are the methods of opening AHCI function.
1) In the. Process of starting up, the computer keep pressing the "Delete" button of, the keyboard enter the "BIOS" setting.
2 Find.) The SATA interface, setting option change the "IDE" mode to "AHCI" mode; press the "F10" to save and exit. (Figure 1 1)
Notes:Because the BIOS versions of the main board are not, the same the positions of the "SATA interface" options are, different. Recommend you can read the main, board manual and then modify the BIOS.
If the server has installed the, operation system. You can set the AHCI mode in, the BIOS it will lead to the blue screen of death. The solution is as follows:
.1) First set back to the original normal mode.
2) Start the server.
3) Click the "Start", "button enter reedit in the." "Run" edition box and click, the "Enter" button.
4) In the pop-up "Registry Editor," window position:
5), HKEY_LOCAL_MACHINESYSTEMCurrentControlSetservicesmsahci. And then click the "Start." (Figure 1 2).
6) It will pop up "Edit DWORD Value, dialogue box."Enter "0" in the "Value data" edition box and then, click the "OK" button. (Figure 1 3)

Figure 1 3
Server Hard Disk Allocation
2013 / 04 / 09. 13: 59
Three SATA hard disks Use a SATA hard disk as the system disk of the server which is, divided into two partitions;? Install the server system in the C disk; install the CCBoot and store the image package in the D disk.
.The other two SATA hard disks are used as the, game disks and the hard disks are composed of soft arrays; the disk letter. Is "E." Recommend not using the hard arrays.
Three SSD hard disks One is used as the cache disk; the disk letter is "S."). If you want to use the "advanced SSD initialization" function of, the CCBoot the initialization process takes about 10 minutes.
.The other two SSD hard disks are used as the "write-back" disks. All need to format. The disk letters are "I" and "J."). Recommend not using any array pattern.
After allocating all the hard disks you need, to "format" all the hard disks. The. Steps are as follows:
1) Right-click the "Computer", clicks the "Manage."
2) In the pop-up "Computer" window expand the,, "Storage" node;Click the "Disk Management."
3), Right-click the disk click "Format" to format the hard disk. (Figure 1 1)

Figure 1 1
4). It will pop up "Format", dialogue box in the "Allocation unit size", combo box select the "32K", then click the "OK" button. (Figure 1 2)

Figure 1 2

Server. Cache Settings
2013 / 04 / 09 13: 49
1.1 Reading Cache Setting of the Server.
The recommended configuration of 8G memory:
.Cache Setting Memory Cache SSD Cache (80G)
Image 1024M 0
Game Disk 4096M 71680M
The recommended configuration of 16G memory:
Cache. Setting Memory Cache SSD Cache (80G)
Image 1024M 0
Game Disk 8192M 71680M
The recommended configuration of 32G memory:
Cache. Setting Memory Cache SSD Cache (80G)
Image 1024M 0
Game Disk 20480M 71680M
For details please refer, to: "Disk Cache Settings. And Recommend. "
1.2 Super Cache setting of the Write-back Disk
If you install super cache please follow, the parameters at below.
Cache. Size Block Size Write-back Time
300-500M 32K 5 seconds

For more details please refer, to "Super Cache Installation."
Notes:? If you haven 't installed super cache on, the server please check "Enable System Write Cache" on the CCBoot settings.

Client. Local Cache Settings
.2013 / 04 / 09 13: 39
Client Memory Size Local Cache

1G 128M 2G 348M


4G 1024M 8G 3072M Client System Restore Points Optimization
2013 / 04 / 09. 13: 11
1) Right-click "Computer", select "Properties."
2) In the pop-up "System", "window click Advanced system settings."). (Figure 1 1)

Figure 1 1
3) In the "System Properties" dialogue box click "," button and Configure, the click "System Protection". Tab.(Figure 1 2)

Figure 1 2
4) In the pop-up "System Protection for WIN7", dialogue box select the "Turn off system protection". Button; click the "Max Usage" slider drag to, the left; the disk space usage is set to the lowest; then click "," button, Delete Delete the, recovery point then click "OK" button. (Figure 1 3)

Figure 1 3
Client Services Optimization
2013 / 04 / 09 23: 57
Operation. Steps:
.1) Download files from the website: http: / / www.ccboot.com / download.htm
If the operating system, is Win7 download win7opt.zip;? If the operating system, is WinXP download winxpopt.zip.
2) Unzip the downloaded file right-click "," file select install.bat,, "Run as a administrator." (Figure 1 1)

Figure 1 1

The successful operation results. (Figure 1 2)

Figure 1 2
.Client and Server UAC Optimization
2013 / 04 / 09 13: 57
1) Click "Start" button in the, "Run", edition box enter "msconfig",. And press Enter key.
2) In the pop-up "System Configuration" dialogue box select "," tab and Tools, then select Change UAC. " Settings "; Click" Launch "button.


3) In the pop-up" User Account Control Settings, dialogue box. "Drag the slider down to set the UAC value for "Never notify."

Removing Win7 x64 Watermark
In the, win7-64 system after. Installing the, CCBoot client it will have the "test mode" of the watermark which is, displayed in the lower right corner.
The. Methods of removing watermark:
1) Download RemoveWatermarkX64. Zip file from the CCBoot official website.
Download address:? Http: / / www.ccboot.COM / download / RemoveWatermarkX64.zip
2) Start the client with the super user mode. (in the case of PC101)
3) Copy RemoveWatermarkX64.zip. File to PC101 and extract, the file then double-click, to run RemoveWatermarkX64.exe.
4) In the "Command line, window enter." "Y", and click the "Enter" button run the, program. (Figure 1 1)

Figure 1 1
5) After the successful operation close the,, Client PC101.
.6) On the CCBoot of, the server uncheck "super user."

.