The major components of a wind turbine for electricity production.Rotor as wind energy and mechanical energy is changed to adhere to a set of rotating axis and rotation axis to the transmission shaft strength from the axis of rotation.Shaft rotation axis. Get inspired from the axis of rotation of the rotor and transmission gear system to modify speed dial and drive the generator.Transmission system is modified and controlled rotational speed. Between the shaft axes rotate with the shaft of the generator.Transmission system is modified and controlled rotational speed. Between the shaft rotation of the turbine. When the wind speed exceeds the ability of the turbine and during repair, maintenance.Generator will make that change the mechanical energy into electrical energy.The electrical control system. A computer system is used to operate and control power into the system.The machine room is large, your intercession is important to wind turbines. Use packaged systems wind turbine generator gear systems, brake systems, and control systems.Anemometer is a pointer to the size of the wind speed to connect the signal cable to the computer system.Wind direction meter pointer is the direction of the wind with a cable to connect a computer system so that the computer will control the other mechanisms properly.Wind direction is rotated neck axis is a rotation of the control room, so that the rotor is wind direction by an electronic system that connects with relation to the wind direction meter at the top of the machine.Pole is a bear that PLA guided above and are located on the area of construction engineering according to the principle of correctly.
การแปล กรุณารอสักครู่..