1.ฉีดLPGเข้าไปในreactorพร้อมกับจุดเ

1.ฉีดLPGเข้าไปในreactorพร้อมกับจุดเปลวไฟโดยIgnition rod และปล่อยอากาศที่main airเข้าburner
2.main air ถูกแบ่งเป็น2ส่วน เข้าไปยังsecondary air and tertiary air.
3.รอจนอุณหภูมิอากาศรอบreactorเข้าสู่steady state
4.blowerจะฉีดbiomass เข้าในsolid fuel inletพร้อมกับอากาศprimary air
5.สังเกตอุณหภูมิที่วัดจากthermocouple เมื่ออุณหภูมิเข้าสู่ช่วงsteady state เราจะปรับลดLPGลงและเพิ่มbiomassเข้าไป

ผลลัพธ์ (อังกฤษ) 1:

1. LPG injection into the reactor with the Ignition flame rod and main burner air emissions into the air.2.main air is divided into 2 sections into secondary and tertiary air air.3. wait until the temperature of the air around the reactor reaches steady state.4. the biomass injection blower Solid fuel into the air inlet with the primary air.5. observe the temperature measurement from thermocouple When the temperature reaches steady state period We will reduce the LPG and the biomass.

ผลลัพธ์ (อังกฤษ) 2:

1. LPG injected into the reactor along with the flames by air Ignition rod and leave the main. Burner air into
2.main Air is divided into 2 parts. Secondary and tertiary Access Air Air.
3. Wait until the temperature of the reactor into steady. State
4.blower injecting biomass into solid fuel inlet air with the primary. Air
5. The temperature measured by the thermocouple. When the steady state temperature to be lowered down and add biomass to LPG.

ผลลัพธ์ (อังกฤษ) 3:

1. Injection into the point LPG reactor with flame by Ignition rod and release the air main air into burner
2.main air was divided into 2 parts. Into the secondary air and tertiary air.
3. Wait for the air temperature around the reactor into steady state
4.Blower will inject biomass in solid fuel inlet with air primary. Air
5. Observe the temperature measured by the thermocouple. When the temperature range into steady state will decrease and increase in LPG biomass
.