Abstract
This paper presents a sinusoidal signal quadrature procedure. Using the principle of sinusoidal signal generator is based on the LC circuit in parallel with positive and negative resistance. Signal circuit includes a current conveyors differential pressure (VDCC) 2 per share with a capacitor to ground and the second resistor to ground to third actuators in voltage mode and current mode. In voltage mode, the circuit can generate a sinusoidal signal quadrature procedure. The current-mode circuit can generate a sinusoidal signal with the phase difference between 180º and can adjust the size of the current output. Circuit can control the condition and the frequency of the signal generator independently from each other by electronic means. There is a total distortion of the harmonic (THD) 0.97 percent lower power consumption at a frequency of 1.12 MHz 1.82 mW at 0.9 V supply voltage range of properties can confirm it works very well through the program. PSICE
Keywords: quadrature signal circuit Rogers, current conveyors differential pressure.
การแปล กรุณารอสักครู่..