How to manicure brushesPieces of work that need to be made to reduce the size of a RASP, it coordinates the work order or a RASP to smooth the surface, according to a procedure or technique, the different ways in which a technician will need to learn and practice:1. to capture pieces.That brought a RASP, it has a different appearance. This requires equipment made to help catch the piece, which consists of a device must be used to help catch the pieces. To catch the piece should not be too high to capture pop 10 mm because it would shake or rocking. The level of catch samples typically address horizontal elbow level, so it's a good idea to check the height of the piece before operating tool.2. the operating standA worker stands a RASP to stand, the body is in the right position. By facing the work piece clamps Preferential foot behind left weight on both feet. While a RASP, body rocking as a RASP The stand works in such a way that right-handed to make fatigue does not occur easily.3. catch a RASPUse a RASP tool to handle this, in accordance with the four-inch SDS Max grip SDS cycle, press the thumb above the butt of a RASP. Acting out the pressure a RASP to the front so that it produces a RASP meat cutting material. The hand grip is not in accordance with section at the end of a RASP acting force and control of a RASP. To catch a RASP has 3 characteristics:3.1 to a RASP of heavy work.As a RASP to sharpen a RASP meat cutting out material forming a RASP is a very rough. The job done using a RASP of heavy handedness caught the butt of a RASP. The above does not apply in accordance with a RASP tip pressed;3.2 to a RASP work softA RASP is a job, a job order size coordinates. To light a RASP using hand selected in accordance with the butt of a RASP handle. Best hand is right-handed use thumb to press at the end of a RASP, and the four finger grip at the bottom end of a RASP.3.3. a RASP up your skinAs a RASP to smooth the surface decoration is shiny and beautiful as the last step of a RASP. Using the hand grip in accordance with the butt of a RASP. Best hand not right-handed finger spread out, the thumb and middle finger to press a RASP four press at the end of a RASP.4. the enforcement of a RASPA control maintains a RASP of a RASP, while working in parallel with the work piece surface while working a RASP tool that can pick out a RASP-forward voltage and pressure at the same time, the hand is not acting in accordance with a RASP to handle gently in and out, hand pressure on both sides to try to press out equally by the eyes looking at pieces in rhythm to pull a RASP to not pressure a RASP and a rasp that eats away at it near or on mandatory weight press.
การแปล กรุณารอสักครู่..