The use and maintenance of electric irons automatically
using
the practice of using an iron
1. Turn the dial to adjust the heat to suit each type of fabric needed
two. Make sure that the electricity can be used to identify the iron power of each category
yet. Cast iron is heated by vertically on the base received about two minutes before rolling
3. lights to turn on when the switch irons. And will extinguish when the iron is heated to a temperature selected on the
flop Traditionally each. Lights heat until the temperature of their choice. And
the temperature dropped, but the thermostat will automatically control the heat. According to different temperatures Who
have been selected on the dial shows the type of fabric
4. You should be ironing the sheets before the temperature polyamide and then to ironing out wool,
parties. And linen, respectively, while the iron heat up. The iron will heat faster than it cools down
five. For the first time the iron was hot. When changing from low to elevated temperatures. In direct
contrast to wait a while to cool down turns
six. When disabled, then rolled to turn the heat to "0" and pull the plug.
การแปล กรุณารอสักครู่..
