ฉันรัก Apparatus: A circular main h

ฉันรัก
Apparatus:

A circular main heater plate (MH) is surrounded by an annular guard heater plate (GH) with a narrow air gap in between. Each heater is made up of electrical resistance wire sandwiched between two copper plates. Thermocouples are fixed to the plates to measure their surface temperatures.
Two identical circular slabs of the material to be tested are placed on either side of and in good thermal contact with the heater plates. On the outer sides of the two slabs, in good thermal contact, are two circular water-cooled slabs whose surface temperatures can also be monitored with thermocouples (Fig 1).
The purpose of the guard heater is to prevent heat loss from the edge of the main heater by maintaining the temperature outside the main heater at the same temperature as the main heater. This ensures that all heat lost from the main heater flows through the test slabs.การแปล

ผลลัพธ์ (อังกฤษ) 1:

I love Apparatus: A circular main heater plate (MH) is surrounded by an annular guard heater plate (GH) with a narrow air gap in between. Each heater is made up of electrical resistance wire sandwiched between two copper plates. Thermocouples are fixed to the plates to measure their surface temperatures.Two identical circular slabs of the material to be tested are placed on either side of and in good thermal contact with the heater plates. On the outer sides of the two slabs, in good thermal contact, are two circular water-cooled slabs whose surface temperatures can also be monitored with thermocouples (Fig 1).The purpose of the heater to prevent heat loss is guard from the edge of the main heater temperature by maintaining the outside temperature the heater at the same main the main heater as This ensures that heat lost all. from the main heater flows through the translation test slabs.

ผลลัพธ์ (อังกฤษ) 2:

I love
Apparatus: A Circular Main Heater Plate (MH) is surrounded by an annular Guard Heater Plate (GH) with a Narrow Air Gap in between. Each Heater is Made up of Electrical resistance Wire sandwiched between Two Copper plates. Thermocouples are fixed to. the plates to measure their surface temperatures. Two identical Circular slabs of the Material to be tested are Placed on either Side of and in good Thermal Contact with the Heater plates. on the Outer sides of the Two slabs, in good Thermal Contact, are Two. Circular Water-cooled slabs whose surface temperatures Can also be monitored with thermocouples (Fig 1). The purpose of the Guard Heater is to Prevent heat loss from the EDGE of the Main Heater by maintaining the Temperature Outside the Main Heater at the Same Temperature as. the main heater. This ensures that all heat lost from the main heater flows through the test slabs. Translation.