Summary of the test results.1. weight of the bed in the master program, Solidwork affects the following:-Aluminum bed replica weighs 24.32 kg-Various mounting bolts with a total weight of 1 kg.-1 kg of weight of steel rail (0.5 kg)-Piston weight 4 kg. (3 kg per cylinder).-Hydraulic oil hose used weight 1 kg-Weight motor weight 5.5 kg-Solenoid valve weight 0.5 kg.-Hydraulic oil, 5 litres total weight 1.67 kg.2. the use of the program is calculated by assigning the following conditions.-The static friction coefficient. Equal to 0.3 points action swivel bed legs-Gravity constant has the value 9.81 m/s 2.-The bed frame on top do not (Fix Support).-With lateral forces from piston size 86. Kg how many area Middle beams connected to emergency patients, bed legs.• Display the calculation of shear stresses (shear) that occurs within the aluminum bed with a computer program. Max shear values are 0.000951000 nm the minimum shear precious 1.742 * 1020 NM, which affects the shape of aluminum, very little.• Display the calculated value to change shape (Deformation) that occurs within the aluminum bed with a computer program. Where the maximum shape change will occur at the wheel and midbeam connect leg of bed sides (red area) by changing the shape of the original has value 0.00027128 m.• Display the calculated value of the tensile stress (Tensile Stress) from occurring within the aluminum bed with a computer program. The immediate value from the maximum tensile stress will be 15 Newton per square metre.
การแปล กรุณารอสักครู่..