OPERATION GUIDELINES1.Remove the co

OPERATION GUIDELINES
1.Remove the cover and put it on the cover holder vertically.Put items in the basket then put them in the cleaning tank.Add water to a level brtween MIN and MAX and above the area to be cleaned.
- If the unit is turned on without water,ultrasonic energy will not be absorbed.This model also has high power.Once on for over 15 seconds,it may damage the unit or severely reduce the life of the unit.
2. Connect the power cord to an outlet and turn the switch on.LED display shows 5:00 This is the most common timer setting and working state. If the timer needs to be adjusted,press button and button .The timer can be set between 1 to 30 minutes.Common cleaning times are 5,10 or 15 minutes.
Prolonged cleaning time may result in:
a.Loosening of the screws if used.
b.Increasing pre-existing cracks.
c.Peeling of coating which was already separated.
3. Press button to start cleaning. During cleaning, buzzing sound can be heard from the cleaning tank,indicating that the cleaning is underway.closing the lid will reduce the noise level.
The digital timer will count down to show the remaining cleaning time.When it displays 00:00,the cleaning is done.
To stop cleaning at any time,press button.The unit is designed with overheating protection to avoid extended and continuous operetion for too long.When the red light is on,the unit will not turn on even if it is forced to. The unit will be idled for about 20 minutes and can be restarted after the green light comes on.
4.

ผลลัพธ์ (อังกฤษ) 2:

OPERATION guidelines
1.Remove the Cover and Put it on the Cover Vertically.Put items in the Basket Holder then Put them in the Cleaning Water Tank.Add Brtween to a level above the MIN and MAX and Area to be cleaned.
- If the UNIT. is turned on without Water, Energy ULTRASONIC Will not be Absorbed.This Model also has for over 15 seconds on High Power.Once, the UNIT or severely damage it May Reduce the Life of the UNIT.
2. Connect the power cord to an outlet and turn the switch on.LED display shows 5:00 This is the most common timer setting and working state. If the Timer Needs to be adjusted, Press Button and Button .The SET Timer Can be between 1 to 30 times are Minutes.Common Cleaning 5,10 or 15 minutes.
Prolonged Cleaning May Result in time:
if A.Loosening of the screws used. .
B.Increasing pre-existing cracks.
C.Peeling of Coating which was already Separated.
3. Press button to start cleaning. During Cleaning, buzzing Sound Can be Heard from the tank Cleaning, Cleaning Indicating that the lid is Underway.closing the Will Reduce the Noise level.
The Digital Timer Will Count down to the remaining Cleaning Show Displays Time.When it 00: 00, the. Cleaning is done.
To Stop Cleaning at any time, Press button.The UNIT is designed with overheating Extended Protection to Avoid Too Long.When and continuous Operetion for the Red Light is on, the UNIT Will not turn on even if it is forced to. . About the UNIT Will be Idled for 20 minutes and Can be restarted after the Green Light Comes on.
4.