Abstract works, this project aims to develop wind power engines. By design Build and test the performance of the engine power. In the laboratory In this project, an adaptation of the air compressor model TA-65/105, size 2 HP 3-cylinder 1 and the air tank 100 liters conducted a second experiment, because while experimenting with automotive gasoline. Patapsco valve damage amount. 2 However, with time and budget constraints. You need to experiment with a two-cylinder engine power when the first trial. The test with the engine power to experiment by adjusting the valves of air tanks 5 different levels and measure the speed at pressure 4, 4.5, 5, 5.5, 6 bar then measured engine speed to calculate power. Of Wind Energy Lab 2 is an experiment with a load (load) using the scales hanging spring. Hang the pulley, then pull until the engine stops, then the weight was recorded. One experiment was repeated three times in pressure to be tested. Against average and then to calculate the torque, shaft power, compression in the cylinder engine derived from wind power. Then all values to calculate performance.
การแปล กรุณารอสักครู่..