How to use an electric kettle to save energy for hot water, a heating appliance categories that are most commonly used. In order for water heating applications such as coffee, take showers or wash the other. Kettle This type is most common. The plug Dig wire will heat until the water boils as needed. How to save energy is one. Add water to some extent Put enough water to fit the needs because if too much water is lost time. And energy by the second. Unplug when not in use - when the water boils. Will need to unplug it immediately - Do not plug in the power by the people or not. This may not save energy It is also the danger of fire is another kettle will be automatically referred to as "electric kettle" Pot of this kind is an electrical device that provides a convenient way to boil water to heat up. There is a kettle and thermos on the same machine as the electric current flows through the coil. Heat and Control The temperature of the water trapped in the mine rose to boiling point, then set the thermostat to cut the power off. But still, a current flows through the coil, but not much. By flowing through the resistor and the light bulb warms. During this water is heated when the temperature of the water is reduced to one point. Set the thermostat to work for boiling water again. An electric kettle, work like this indefinitely. If it is plugged in Should pull the plug when not to use hot water anymore. To save energy Notes: Kettle is open 15 hours a day, 500 watt electricity per month is approximately 6 baht / 1300 watt electric kettle, open 15 hours a day. Electricity bill per month is approximately 16 baht.
การแปล กรุณารอสักครู่..
