amaha and bass guitar manufacturing

amaha and bass guitar manufacturing company said. Is the top leading brands in Japan. That is popular as a long each. Production will focus on quality and resolution. The bass is a bass guitar Made in Japan each building will take longer than 3-6 months of work from start to finish. The selection that is beautiful and quality standards on each timber type through the cutting process, forming a part of the bass guitar, and then going through the process of assembling the various stages. Which have specialists in each production line to produce a moderator. And provide expertise in every step sitka spruce wood ready to be assembled into the wood (top) technical experts that will select the wood is beautiful only. If not, it will not be used for Made in Japan will be focused on every point, too. Keep neatness of the neck or neck bass guitar machine after running rough. But it is not enough alone. Be used again To keep the details Gradually dismissed the PA to the point. Assembly bass (up body) all the way through to consist of 100% in the Tradition Guitar still style / method in the original. (Machines to specific components or pieces Parts Only) down to the glue binding around the guitar, bass waiting period. To pass to the next stage. Is the guitar, bass and Finish.
Production of Fender bass guitar first and most important step in the construction of Bass wood is the choice of wood will directly affect the quality of sound. Wood finished product will be free from defects. And a straight vertical grain from each type of bass guitar. Different woods of the construction process, different parts of the following sections. A detailed Production of acoustic guitar, bass, General Bookmatching.
1) Wood for the top of the bass is cut out of wood. By using a process called bookmatching Bookmatching is how the piece of wood that has been cut into two panels, each the same length. And width the same, but only half as thick as this will help pad tablet form two symmetrical plates. Are matched to ensure continuity in cereal, dried and glued together on board new guests. Contrary to the thickness They have the right to monitor closely the quality and. Then, arranged by color closeness and consistency of grain and absence of acne.
2) The next step is. Off the top of a bass guitar Exit a large piece of wood. The final cut soundhole has carved a barrel for the concentric circles that serve as decorative inlays around the soundhole.
3) teeth are not caught up with the bottom of the top piece strutting the stage is often called, serves two purposes nest to pull the strings and control the shaking of the building guitars. that vary from company to company, strutting great bass sound effect braces today are caught in the x- model designed by Martin company forms, most experts feel that the sound is incomparable. and that even a company like Ovation and Gibson continued to experiment with improvements in X - strutting style of the original concept, Martin acknowledged. Widely To produce the best sound
4) return, though not as important as the first sound remains. Important to guitar, bass reflect sound waves back was braced yet, but the work is not parallel from left to right with one of the cross-grained, running down the length of the back of the glue joint to be cut and installed. adhesive similar to the above and from the same piece of wood on top to make sure it meets the seeds using techniques bookinatch.
5) The construction consists of cutting and polishing wood to the proper length and thickness and light wood in a band that is already in the mold with a curved shape of a guitar, bass, and the entire assembly to force a long time. ensure symmetry between the two sides, both sides will share with basswood glued interior wall panels and furniture accessories are placed side by side so that the bass not break if hit from the side by two endblocks (near the neck. the bottom of the guitar, bass) will also be in attendance on the back and neck.
6) When the parties to attend and ending block in place on the top and back glued to the side, not the excess will be eliminated and the field was cut to the top and sides split rear these channels. tied for the body covering the entire bass guitar tie is not only decorative, they also keep moisture from entering through the side and warping bass guitar.
7) the neck is made from one piece of solid wood is mahogany or rosewood carved exact specifications reinforcing rod is inserted through the length of the neck and after polishing Goldfinger (usually made of ebony or rosewood), located in. place the stencil was used to measure the precise cut and grilled anxiety steel cables are put in place.
8) on the construction of the neck then it is attached to the body of the guitar, bass, attach the neck and body by adjusting the heel protruding from the base of the throat is slit cut in the body when the glue is dry, isolated neck body. the guitar has a coat of sealer and several coats of lacque

ผลลัพธ์ (อังกฤษ) 2:

amaha and bass guitar manufacturing company said. Is the top leading brands in Japan. That is popular as a long each. Production will focus on quality and resolution. The bass is a bass guitar Made in Japan each building will take longer than 3-6 months of work from start to finish. The selection that is beautiful and quality standards on each timber type through the cutting process, forming a part of the bass guitar, and then going through the process of assembling the various stages. Which have specialists in each production line to produce a moderator. And provide expertise in every step sitka spruce wood ready to be assembled into the wood (top) technical experts that will select the wood is beautiful only. If not, it will not be used for Made in Japan will be focused on every point, too. Keep neatness of the neck or neck bass guitar machine after running rough. But it is not enough alone. Be used again To keep the details Gradually dismissed the PA to the point. Assembly bass (up body) all the way through to consist of 100% in the Tradition Guitar still style / method in the original. (Machines to specific components or pieces Parts Only) down to the glue binding around the guitar, bass waiting period. To pass to the next stage. Is the Guitar, Bass and Finish.
Production of Fender Bass Guitar and Most important First Step in Construction of the Bass Wood is the Choice of Wood Will directly affect the quality of Sound. Wood finished product will be free from defects. And a straight vertical grain from each type of bass guitar. Different woods of the construction process, different parts of the following sections. A detailed Production of acoustic Guitar, Bass, General Bookmatching.
1) Wood for the top of the Bass Cut is out of Wood. By using a process called bookmatching Bookmatching is how the piece of wood that has been cut into two panels, each the same length. And width the same, but only half as thick as this will help pad tablet form two symmetrical plates. Are matched to ensure continuity in cereal, dried and glued together on board new guests. Contrary to the thickness They have the right to monitor closely the quality and. Then, arranged by Color Closeness and consistency of Grain and absence of Acne.
2) The next Step is. Off the top of a bass guitar Exit a large piece of wood. The Final Cut Soundhole has carved a Barrel for the concentric Circles that serve as decorative inlays Around the Soundhole.
3) Teeth are not caught up with the bottom of the top piece Strutting the Stage is often Called, serves Two purposes Nest to pull the Strings. and control the shaking of the building guitars. that vary from company to company, strutting great bass sound effect braces today are caught in the x- model designed by Martin company forms, most experts feel that the sound is incomparable. and that even a company like Ovation and Gibson continued to experiment with improvements in X - strutting style of the original concept, Martin acknowledged. Widely To Produce the best Sound
4) Return, though not as important as the First Sound remains. Important to guitar, bass reflect sound waves back was braced yet, but the work is not parallel from left to right with one of the cross-grained, running down the length of the back of the glue joint to be cut and installed. adhesive similar to the above and from the Same piece of Wood on top to Make sure it Meets the Seeds using techniques Bookinatch.
5) The Construction consists of cutting and Polishing Wood to the Proper Length and Thickness and Light Wood in a Band that is already. in the mold with a curved shape of a guitar, bass, and the entire assembly to force a long time. ensure symmetry between the two sides, both sides will share with basswood glued interior wall panels and furniture accessories are placed side by side so that the bass not break if hit from the side by two endblocks (near the neck. the bottom of the guitar,. Bass) Will also be in Attendance on the back and neck.
6) When the Parties to attend and Ending Block in Place on the top and back glued to the Side, not the excess Will be eliminated and the Field was Cut to the top and. sides split rear these channels. tied for the Body covering the entire Bass Guitar tie is not only decorative, they also Keep Moisture from entering Through the Side and warping Bass Guitar.
7) the neck is Made from one piece of Solid Wood is Mahogany or Rosewood carved Exact Specifications reinforcing Rod. is inserted Through the Length of the neck and after Polishing Goldfinger (usually Made of Ebony or Rosewood), located in. Place the stencil was used to measure the Precise Cut and Grilled Anxiety Steel cables are Put in Place.
8) on the Construction of. the neck then it is attached to the body of the guitar, bass, attach the neck and body by adjusting the heel protruding from the base of the throat is slit cut in the body when the glue is dry, isolated neck body. the guitar has a coat of sealer and several coats of lacque.

ผลลัพธ์ (อังกฤษ) 3:

Amaha and bass guitar manufacturing company said. Is the top leading brands in Japan. That is popular as a long each. Production. Will focus on quality and resolution. The bass is a bass guitar Made in Japan each building will take longer than 3-6 months. Of work from start to finish. The selection that is beautiful and quality standards on each timber type through the cutting. Process forming a, part of the bass guitar and then, going through the process of assembling the various stages. Which have. Specialists in each production line to produce a moderator. And provide expertise in every step Sitka spruce wood ready. To be assembled into the wood (top) technical experts that will select the wood is beautiful only. If not it will, not be. Used for Made in Japan will be focused on, every point too. Keep neatness of the neck or neck bass guitar machine after. Running rough. But it is not enough alone. Be used again To keep the details Gradually dismissed the PA to the point. Assembly. Bass (up body) all the way through to consist of 100% in the Tradition Guitar still style / method in the original. (Machines. To specific components or pieces Parts Only) down to the glue binding around the guitar bass waiting, period. To pass to. The next stage. Is the guitar bass and, Finish.Production of Fender bass guitar first and most important step in the construction of Bass wood is the choice of wood will. Directly affect the quality of sound. Wood finished product will be free from defects. And a straight vertical grain from. Each type of bass guitar. Different woods of the construction process different parts, of the following sections. A detailed. Production of acoustic, General bass guitar, Bookmatching.1) Wood for the top of the bass is cut out of wood. By using a process called bookmatching Bookmatching is how the piece. Of wood that has been cut into, two panels each the same length. And width the same but only, half as thick as this will. Help pad tablet form two symmetrical plates. Are matched to ensure continuity in cereal dried and, glued together on board. New guests. Contrary to the thickness They have the right to monitor closely the quality and. Then arranged by, color closeness. And consistency of grain and absence of acne.2) The next step is. Off the top of a bass guitar Exit a large piece of wood. The final cut soundhole has carved a barrel. For the concentric circles that serve as decorative inlays around the soundhole.3) teeth are not caught up with the bottom of the top piece strutting the stage is often called serves two, purposes nest. To pull the strings and control the shaking of the building guitars. That vary from company to company strutting great,, Bass sound effect braces today are caught in the X - model designed by Martin company forms most experts, feel that the sound. Is incomparable. And that even a company like Ovation and Gibson continued to experiment with improvements in X - strutting. Style of the, original concept Martin acknowledged. Widely To produce the best sound.4), return though not as important as the first sound remains. Important to guitar bass reflect, sound waves back was braced. Yet but the, work is not parallel from left to right with one of the cross-grained running down, the length of the back. Of the glue joint to be cut and installed. Adhesive similar to the above and from the same piece of wood on top to make. Sure it meets the seeds using techniques bookinatch.5) The construction consists of cutting and polishing wood to the proper length and thickness and light wood in a band. That is already in the mold with a curved shape of, a guitar bass and the, entire assembly to force a long time. Ensure. Symmetry between the, two sides both sides will share with basswood glued interior wall panels and furniture accessories. Are placed side by side so that the bass not break if hit from the side by two endblocks (near the neck. The bottom of the. Guitar bass), will also be in attendance on the back and neck.6) When the parties to attend and ending block in place on the top and back glued to, the side not the excess will be eliminated. And the field was cut to the top and sides split rear these channels. Tied for the body covering the entire bass guitar. Tie is not only decorative they also, keep moisture from entering through the side and warping bass guitar.7) the neck is made from one piece of solid wood is mahogany or rosewood carved exact specifications reinforcing rod is. Inserted through the length of the neck and after polishing Goldfinger (usually made of ebony or rosewood), located, in. Place the stencil was used to measure the precise cut and grilled anxiety steel cables are put in place.8) on the construction of the neck then it is attached to the body of, the guitar bass attach the, neck and body by adjusting. The heel protruding from the base of the throat is slit cut in the body when the glue, is dry isolated neck body. The guitar. Has a coat of sealer and several coats of lacque.