จำไว้

จำไว้

ผลลัพธ์ (อังกฤษ) 1:

Remember

ผลลัพธ์ (อังกฤษ) 3:

In order to supply hot-water of a constant temperature in the.Pipe under, the slab stored hot-water could be maintained at the.Specified temperature through the boiler heat exchanger and,,,Storage 12 tank [].It is necessary to select the centre and measure the temperature.Between the nearest section of the pipe and the nearest part to the.Middle point of the room to analyze the heating conditions in.The room. Also thermocouples are, used to measure the temperatures.Of, the room the wall and the ceiling in the centre of each part.A thermocouple 1.5 m, above the ground is used, to gauge the room.Temperature.Fig. 6 shows a schematic diagram for the data acquisition.System. The on - off control between the thermal storage tank and.The heat exchanger could maintain the temperature of the hot.Water in the tank. Hot-water at a constant temperature is sent.Indoors to the slab pipe by, the pump and the returned water goes.Back to the tank. At this moment data for, temperatures of supplied.Water returned water, and each section of the room are saved in the.PC.